borate

As the issue can't be duplicated here in v7.32, either with your project or a new one, suggest you revert to an older version. Try this. It's best if a project is reloaded, and exported, by the version that created it.

Took a look in v7.32 and was unable to duplicate your issue. Every overlay, whether text or video, followed the timeline during play and export. Spotted two incorrect overlays, at about 5:56 and 17:03, where the desired video was overridden by a higher track. Back up the project. Then go to Control Panel|Programs and Features and right-click the Videopad item. Uninstall, including data files. Then install the current release version. Report results here.

Upload the clip and share it here; someone will check it out. Use a free server, such as Google Drive, MS OneDrive, DropBox or the like. Share the clip and post the link here. Specifically, what editing did you apply to the file to remove hiss? What version of Videopad is being used?

Yes, we need to see the actual project, or a portion thereof that demonstrates the text overrun. Instructions above.

Assuming that the final text clip is on a higher track than the main video (an overlay), have you dragged its right border to the left to match up with the end of the lower-track clip? Let's take a look at the project, so folks can analyze what might be the cause of the issue... Here's how... http://nch.invisionzone.com/topic/23659-tips-for-getting-help-on-this-forum/ If it contains sensitive material you can link it in a personal message (PM) to me, via the envelope above. Be sure to FILE|SAVE PORTABLE PROJECT AS, not simply SAVE PROJECT, and don't forget to share it.

Though it's Windows, not Mac here...would still like to take a look at your project, to my PM box. Because the project is big, you might split out and delete part of it (after saving, of course) and submit the remainder for analysis per the instructions above.

Any unlicensed trial version can be installed. Hang on to your old installer. It would be helpful in tracking down issues if you could address Macfly's questions, above.

If adding multiple effects to a single clip, try reversing the order in which they are applied. Someone will analyze the project, or a segment that has blacked out on the sequence. Here's how to share it... http://nch.invisionzone.com/topic/23659-tips-for-getting-help-on-this-forum/ If it contains sensitive material you can link it in a personal message (PM) to me, via the envelope above. Be sure to FILE|SAVE PORTABLE PROJECT AS, not simply SAVE PROJECT, and don't forget to share it.

Can't analyze it unless it can been seen. If you don't want it made public send a private message by clicking the mail folder at the top-right of this forum. A recent green screen project run in v7.32 here looked clean.

Make your thoughts known. Click on the chevron at the top-right of the VP window and report bugs or make suggestions. The developers do see them.

What Videopad version is being used? Here is the latest. For licensed users upgrades are free for up to six months. After that, VP will continue to fully function but a fee will be required in order to register the newest. Let's take a look at a sample of your project. Place it on the timeline, then follow these instructions. Someone will check it out. http://nch.invisionzone.com/topic/23659-tips-for-getting-help-on-this-forum/ If it contains sensitive material you can link it in a personal message (PM) to me, via the envelope above. Be sure to FILE|SAVE PORTABLE PROJECT AS, not simply SAVE PROJECT, and don't forget to share it.

The project was saved here, and sent to Jack in a PM.

The policy is stated here. https://www.nchsoftware.com/videopad/versions.html If you delve into competing products you will discover that this marketing approach is not exclusive to VP. One prosumer editor that comes to mind charges a substantial fee for yearly updates. The subscription model is becoming more popular - at least with firms if not their clients. VP offers it as well, so that would keep you current. With some programs it is now the only payment option.

Applied a number of pan/zoom and zoom effects to your project and didn't encounter problems. Perhaps a bad install. Delete the "C:\Users\<your name>\AppData\Roaming\NCH Software\Components" folder and reinstall. Or try v7.33 beta, which is a test and is subject to change. Report results here.

There should be a marked contrast between the screen and the non-green subject. Use the threshold, fading and feathering sliders to tweak the edges. Use the latest Videopad version. For licensed users upgrades are free for up to six months. After that, VP will continue to fully function but a fee will be required in order to register the newest.

Please upload a small source file that exihibits this behavior in VP, so someone can experiment with it. Use Google Drive, MS OneDrive or the like and share the file with a link here. Thanks.

Sorry, don't have those answers for you. But here's a resource that should put you in touch with someone who does... https://www.nchsoftware.com/videopad/support.html Note the link to a tech support form, at the bottom of the page. Yes, that's a large file. But if you do decide to share, it will be passed along to the developers, who are keen on tracking down problems.

Don't know that success in Windows would prove success on your Mac, but you can PM it to me via the envelop in the top-right corner of this forum. Click on Compose a New Message and then type "borate" into the TO field. Load the project that you created in 7.31, save as PORTABLE project, upload, share and send me the link. It may be passed along to the developers for analysis. Please detail your experience with the latest Mac version in a Bug Report, as suggested above.

In Windows each installer is saved to the programs folder. On the Mac you might use the finder to locate the VP executable. If that fails 6.03 may be available here. That's not a sanctioned NCH site, but appears to be legit. Beware of extra offers during the install, and reject them. Unfamiliar with Mac user interface nuances here, but the process of saving as a portable project should be similar to Windows versions. Here's what the general HELP file says... Finalize a Project - Backing Up or Moving a Project to Another Computer A project file only stores the paths of media files (including video, audio, and image files), not the entire file contents. When a project file is loaded, it attempts to find and load the media files using those file paths. If a media file has been moved or deleted, or the project file alone has been copied or moved to another computer, VideoPad will not be able to find the original media files. To back up a project and all its media files, or to move a project and all its media files to another computer, select File -> Back Up Project Files to Folder, or Save Portable Project As. This will save a new copy of the project (.vpj) file in the selected folder, and all media files used in the project will also be copied into the same folder. This entire folder can then be saved to backup media, or copied or moved to another computer. Once the portable project is saved, follow the instructions in the link above to upload and share it here or in a private message.

Reinstall your older version. Does it succeed? If so, please file a bug report. Click the chevron at the top-right of the Videopad window and fill out the bug form. If you care to share a short project for analysis, it's not difficult. Here's how... http://nch.invisionzone.com/topic/23659-tips-for-getting-help-on-this-forum/ If it contains sensitive material you can link it in a personal message (PM) to me, via the envelope above. Be sure to FILE|SAVE PORTABLE PROJECT AS, not simply SAVE PROJECT, and don't forget to share it.

This may be a bug that has been fixed. Try your export in v7.33, which succeeded here.

To the right of "File Format" there is a blue "Default Quality/Filesize" blue link. Click on it and you will see a Lossless Export field where it can be disabled. Downloaded your intro clip from OneDrive and exported it from v7.33 Videopad once again. Both results were flawless; not a hint of a glitch at the edit point???

What version of Videopad created the project.

What version of Videopad is being used? Exported your project (sequence 2 only) from beta v7.33 and there was no hesitation when played in Windows Media Player or MPC-HC. Deleted a snippet of extraneous video at the end and exported once again with the same result. If you are running a Windows PC, consider trying that test version, while keeping in mind that it is subject to change and may have undiscovered bugs. For licensed users upgrades are free for up to six months. After that, VP will continue to fully function but a fee will be required in order to register the newest.

What version of Videopad is being used? It's likely this can be solved if you share your project, so others can test it. It's not difficult. Here's how... http://nch.invisionzone.com/topic/23659-tips-for-getting-help-on-this-forum/ If it contains sensitive material you can link it in a personal message (PM) to me, via the envelope above. Be sure to FILE|SAVE PORTABLE PROJECT AS, not simply SAVE PROJECT, and don't forget to share it.