n1x1

Hi, You may try the following: 1. Connect your mixer to your laptop via a USB cable or an audio interface. 2. Open MixPad and create a new project. 3. Create separate tracks in MixPad for each input channel on your mixer. To create a new track, click on the "Track" menu at the top of the MixPad window, and select "Add Track". Repeat this step until you have created a track for each input on your mixer. 4. In the "Devices" section of the MixPad preferences, select your mixer as the recording device. 5. On each track in MixPad, set the input source to the corresponding channel on your mixer. Click on the track to select it, then go to the "Input" section of the track settings on the left-hand side of the MixPad window. Here, you can select the input source for that track. 6. Arm each track for recording. Click on the arm button on each track to enable it for recording. 7. Start recording by clicking the record button in MixPad. Once you have completed these steps, each input channel from your mixer should be recorded onto a separate track in MixPad.

Hi, - Make sure that you have the correct recording device selected in the MixPad settings. Go to "Options" > "General" tab > "Devices" and make sure that your recording device is selected. - Make sure that the effects you want to apply are inserted into the effects chain for that track. Click on the track to select it, then go to the "FX" tab on the left-hand side of the MixPad window. Here, you can add or remove effects from the chain. - Adjust the settings of the effects to achieve the desired sound. You can adjust the parameters of each effect by clicking on it in the effects chain and adjusting the settings in the window that appears. - Arm the track for recording, and then hit the record button to start recording with the effects applied.

Hi, To apply the overlay on top of the current video, click on Tools -> Camera Overlay, a side panel will be displayed on the right of the preview. Tick the Enable checkbox. At this moment it is not possible to set this as default. You can leave your suggestion for implementing this feature, here is the link: https://files.fm/

Hi @EdmundD, I have uploaded a screenshot showing where the Print button is: https://files.fm/u/a9kgm9age

Hi @Denise70, You can try the following: 1. Open the program 2. Click on the Options button and go to the Audio tab 3. Make sure that the Microphone and Speaker options are checked 4. Click on the System Mixer button 5. Click on the active microphone and then Properties 6. In the Microphone Properties button under the Levels tab adjust the Level by moving the slider

H, In order to print your Chart of Accounts click Report > Chart of Accounts > Click View > Click on the Print button or you can use Ctrl + P. The Chart of Accounts will include the following information: Amount, Description, and Normal Sign.

Hi @Denise70, Does the issue occur with all videos you try to record or only with this specific one?

Hi @EdmundD You can try finding the drivers that will help you fix this issue. For starters, try upgrading, if that doesn't work, try downgrading to the original version or consult with the manufacturer support about this.

Hi @Lancelot Chan Please leave your suggestion on our official suggestion page, here is the link: https://www.nch.com.au/suggestions/index.html

Hi, I suggest you to contact NCH technical support so they can give you the latest version that is covered by your license. Here is the link: NCH Software - Technical & Support Services

Hi, Sie können versuchen, die Software neu zu installieren und das Ergebnis überprüfen.

Hi, Welches Dateiformat des Fotos haben Sie versucht hochzuladen? Versuchen Sie, das Foto in ein anderes Dateiformat zu konvertieren und überprüfen Sie das Ergebnis.

Hi, You can try to reinstall the software and check the result.

Hi @proarenee, Which file format have you uploaded? Are you able to play the file outside the program?

Hi @Jed, Check if you have maybe clicked on the Loop button. I have attached a screenshot showing where you can find this button: https://files.fm/u/ej52tyr7b

Hi, You can check the following link for more information: http://help.nchsoftware.com/help/en/expressaccounts/win/chartaccounts.html

Hi, I suggest you to contact NCH technical support and share with them the file you had issues with. You can create a ticket using the following link: https://www.nch.com.au/support/index.html

You can leave the suggestion for the developers on the following link: https://www.nch.com.au/suggestions/index.html

Hi, MoneyLine's reports can be accessed by clicking the Reports menu and selecting the desired report. There are four reports you can use to analyze your spending: - Income/Expenses by Category - Expenses by Payee - Account Activity - Budget

Hi, All data is stored locally on your computer. The only option to recover your data is if you have a backup file. Here is how you can restore the backup file you have: - From the Tools menu, select Restore Data... - Click the Restore from backup button - Browse to your backup file and click OK - The data will be restored and a Data Restore Success window will open when it is finished - Click OK

H, You can try to reinstall the software and check if the issue still persists.

Hi, Do you get any error messages when recording?

Hi @MacyBentley, If you need a software only for editing PFD files ( to easily create, edit or sign your PDF documents, add text or edit existing text, make layout adjustments, insert, move, or delete images in existing PDF files) I suggest you to check NCH software > PicoPDF Editor. On the following link, you can find more information about this program: https://www.nchsoftware.com/picopdf/index.html In case you need technical assistance with Doxillion I suggest you to contact NCH technical support, here is the link: https://www.nch.com.au/support/index.html

Hi, SoundTap is compatible with Windows 11. You can check this information on the official website, here is the link: https://www.nch.com.au/soundtap/index.html You can try restarting the computer at least twice as to make sure that the drivers are loaded properly. If it still does the same thing, please try installing all available Windows Updates in the computer as it could be a sound driver issue that may need to be updated.

Hi @Campuscoll, The registration code should be on your email address. If you are not able to find the code for some reason I suggest you to contact NCH technical support for help as the registration code is a confidential information. You can contact NCH technical support using the following link: https://www.nch.com.au/support/index.html