JeremyP1990 Posted April 28, 2021 Share Posted April 28, 2021 Whenever I used older versions of VideoPad, I would set the zoom effect parameters and the clip would display just fine. |It filled the frame just as I wanted. Now when I click zoom effect in the newest version, all it does is shrink the size of the clip and create black bars across the frame instead of filling it. To top it off, in the exported video where the black bars are, it shows a still image of the last clip... This makes no sense to me. Link to comment Share on other sites More sharing options...
borate Posted April 28, 2021 Share Posted April 28, 2021 What version? Install this one. For licensed users upgrades are free for up to six months from purchase date. After that, VP will continue to fully function but a fee will be required in order to register the newest. Retain your old install file and registration info. Note the ZOOM Aspect Ratio drop-down menu. Also try the SCALE effect. ZOOM.mp4 Link to comment Share on other sites More sharing options...
Nationalsolo Posted April 28, 2021 Share Posted April 28, 2021 Hi Zoom working fine in version 10.35 Nat Link to comment Share on other sites More sharing options...
JeremyP1990 Posted April 28, 2021 Author Share Posted April 28, 2021 10.34. I will try updating, but so far it's just making black bars and still not filling the frame. EDIT - No luck. Still does the same thing; black bars instead of filling the frame.. Link to comment Share on other sites More sharing options...
borate Posted April 28, 2021 Share Posted April 28, 2021 Please share the image in question and indicate what area is to be zoomed. Someone will check it out... Just upload the file/s to a free server, such as Google Drive or MS OneDrive, get a shared (public) link, copy the link and paste it here or to me in a Private Message via the mail envelope in the top-right corner of this forum. Using Google Drive, if necessary change "restricted" to "anyone with link can view." Link to comment Share on other sites More sharing options...
gibson23 Posted April 30, 2021 Share Posted April 30, 2021 Same Problem Here - I have the newest version (10.34). UPDATE - I installed version 10/36 and that seems to have fixed the issue. Link to comment Share on other sites More sharing options...
HEC Posted June 23, 2021 Share Posted June 23, 2021 I just upgraded my Videopad from 5.xx to the latest, and the Pan & Zoom effect has gone crazy. I have one clip which is a long horizontal image which I used to zoom from left to right within a 16:9 frame, but when using the upgraded software the frame now forced to the proportions of the original image (something like 4:1) and cannot be adjusted to fit the full screen (see screenshot here). Is there a new setting which I have to adjust to allow the frame to be unlocked from its original proportions? I have the same problem with a later sequence using a vertical pan going up a very tall portrait layout image. I'm starting to regret paying for the upgrade. It was working fine previously. Thankfully I had already created the video prior to upgrading so I still have the results I wanted: https://www.ergo-travel.com//APICS/GreatArtCities-promo3.mp4 (horizontal pan at 0:31s, vertical pan at 0:50s) Link to comment Share on other sites More sharing options...
Nationalsolo Posted June 23, 2021 Share Posted June 23, 2021 Hi If you have a wide horizontal image and want to pan across it and retain a full screen then use just the Zoom Effect with key frames. If you want full screen AR 16:9 then set that value. Steps would be.. Click the FX box for the clip Select the Zoom effect Set Zoom AR from the list to 16:9 Move the red effect cursor line on the graph to the far left (for a left-right pan) which is the start of the clip Adjust the rectangle to outline the area required. This will be the start frame. If you use dual previews then you will see exactly what the effect will be, You can set these with Options/Display When you are happy with the result click the Set Keyframe tab. This the start of the pan Move the red cursor line across the effect graph page to the far right which is the end of the clip Adjust the rectangle again if required (You may want your pan to zoom in or out as well as pan) otherwise keep the size values for the rectangle the same as at the start. Keep the height vale the same. Create a second Key frame. this will be the end of the pan.... e.g.... Keyframe 1 Keyframe 2 When played the clip will pan from left to right (in this example) keeping a full screen AR of 16:9. as seen in the Sequence Preview window on the right. The speed of pan will be relative to the duration of the clip. An image can be pulled out along the timeline to slow the pan down or it can be shortened to make the pan faster. Using keyframes you can halt a pan at any point or make it start after an initial pause etc. Unless you include them inside your rectangle setting, there will be no borders. Depending on the actual AR of the clip you may lose some actual image. In the example shown the sky and grass has been cropped to allow a 16:9 frame to move a reasonable distance across the image. In this case making the 16:9 rectangle larger the pan would have been much shorter. You can, of course go back to the effect parameter window and alter the rectangle to suit. Nat Link to comment Share on other sites More sharing options...
borate Posted June 23, 2021 Share Posted June 23, 2021 Good approach. You might also test Pan & Zoom, setting A/R to 16:9, then sizing the start and end boxes. Link to comment Share on other sites More sharing options...
HEC Posted June 24, 2021 Share Posted June 24, 2021 Oops, how embarrassing. I missed the Aspect Ratio selection in the Pan and Zoom FX! So it was a non-issue... my apologies! Everything is fine now. Link to comment Share on other sites More sharing options...
Nationalsolo Posted June 24, 2021 Share Posted June 24, 2021 HI "....Oops, how embarrassing....." Not at all. There are lots of things available in this program and bits are easy to miss even when we use it a lot. Nat Link to comment Share on other sites More sharing options...
HEC Posted June 27, 2021 Share Posted June 27, 2021 Yeah, but this was literally right under the arrow of my cursor... sheesh. 🙄 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now