WEKurtz Posted November 22, 2013 Share Posted November 22, 2013 I've edited a 25 min. video from other 21 short videos. I've tryed to export using fddshow and H264 encoders, but the program always freezes at 15%... Any idea? Tghank You! Link to comment Share on other sites More sharing options...
richardspellman Posted November 24, 2013 Share Posted November 24, 2013 I have the same problem - but at 95% Link to comment Share on other sites More sharing options...
coolbowfin Posted November 26, 2013 Share Posted November 26, 2013 I am having the same problem with the latest version of Videopad. This never happened before i upgraded to the latest version. Mine freezes but not necessarily in the same spot during mp4 creation. Any ideas??? Link to comment Share on other sites More sharing options...
PaulX Posted November 27, 2013 Share Posted November 27, 2013 Not sure if this will help any of you but I've had the same problem and the solution for me was finding the point in the video where it kept freezing and then deleting or changing some of the effects at that point in the video. The slow motion effect for example always made my video stop rendering once it got to that efect. Link to comment Share on other sites More sharing options...
Smartster Posted December 4, 2013 Share Posted December 4, 2013 This has been happening to me too! I have a 15 min holiday film using HD 1080p video files and it crashes at around 7% whether it be as a file or trying to burn to DVD. I think my PC may have something to do with as it was struggling when I was uploading the video files into the programme. What is the recommended spec for a PC when working with VideoPad and HD footage? My PC is quite old, only 1GB RAM and a 3.06Ghz Celeron CPU. I have all the vid files kept on a 1TB external drive rather than on the PC though. But the programme still crashes. Link to comment Share on other sites More sharing options...
Smartster Posted December 4, 2013 Share Posted December 4, 2013 I am having the same problem with the latest version of Videopad. This never happened before i upgraded to the latest version. Mine freezes but not necessarily in the same spot during mp4 creation. Any ideas??? What's the spec of your PC, is it more powerful than mine (see 5th post above)? Link to comment Share on other sites More sharing options...
defender Posted December 21, 2013 Share Posted December 21, 2013 Darn, I have the same problem with my video. It was stuck at 95%, but I followed PaulX's advice and it got all the way to 99%, then stuck again. And no amount of splicing the video or changing effects seems to help it finish :/ Edit: Turns out, with enough splicing and transitions, I was able to get past the stuck point. Link to comment Share on other sites More sharing options...
Dougie Posted December 21, 2013 Share Posted December 21, 2013 For folks like PaulX, I've had the same problem but only with slow motion clips .When the render reaches a slow motion clip, it quits. My work around is to do the slow motion effect to the individual clip(s) first (before doing any final edit), and rendering that as a new clip. Then the new clip(s) can be added to the time line during the final edit and the video will render out fine. No guarantees, but it works for me. Link to comment Share on other sites More sharing options...
defender Posted December 22, 2013 Share Posted December 22, 2013 For folks like PaulX, I've had the same problem but only with slow motion clips .When the render reaches a slow motion clip, it quits. My work around is to do the slow motion effect to the individual clip(s) first (before doing any final edit), and rendering that as a new clip. Then the new clip(s) can be added to the time line during the final edit and the video will render out fine. No guarantees, but it works for me. Oy, I should've thought of that. Thanks for the idea. I had a similar problem with a set of slow motion clips. Though when I got the export to work, the video was blacked out (as it was in the preview, but I was hoping the export would work better than preview) -- See my other thread, hopefully it can be fixed in the next version so someone else doesn't hit the same problem: http://nch.invisionzone.com/index.php?/topic/20643-preview-going-black/ Link to comment Share on other sites More sharing options...
adsii1970 Posted April 7, 2014 Share Posted April 7, 2014 I bought the software and installed it. When I am exporting the project to any format, it will "convert" until it gets down to 99%. Once it gets to this point, the software hangs up and will not complete the video. I have even left it at 99% overnight (six hours) and it does not finish the export. I have uninstalled the software, checked all my drivers, and reinstalled the software. I have bought a license (still will not work). I am running Windows 8.1. Any help? Link to comment Share on other sites More sharing options...
mingtoshing Posted August 12, 2014 Share Posted August 12, 2014 I got the same problem, but at 97% and only 3 seconds left...... forever! I tried to call and email but nobody responded. It seems that we should pay for support as bugs are embedded inside the software. Very distressing as we tried so many hours on editing and cannot finished. Will look for a reputable brand. Link to comment Share on other sites More sharing options...
Freequence Posted October 12, 2018 Share Posted October 12, 2018 Hi, Thanks to PaulX for good help. i played with tracks and i found the problem. for me, every text layers and .png layers were the problem. i deleted all of those so export worked correctly. but i used another software to put texts on my video. just wanted to say my way here. hope it works for you guys. sry for bad english. peace Link to comment Share on other sites More sharing options...
ROTTENCORPSE Posted April 18, 2020 Share Posted April 18, 2020 I've done zero edits other than adding a title and it freezes at random areas... sometimes 60% sometimes 95%... this is terrible... i know if it's free but, come on... Link to comment Share on other sites More sharing options...
borate Posted April 18, 2020 Share Posted April 18, 2020 You have tacked onto an old thread. Best to start a new one with a descriptive subject and specifics in the body. What version of VP is being used? Is it freezing on preview or upon export? What is the resolution and format of the source file/s? Link to comment Share on other sites More sharing options...
HappyLife Posted April 20, 2020 Share Posted April 20, 2020 In my case, it works fine with slow motion effects, but stops with reverse playback effects. I also strongly request improvement of VideoPad. Link to comment Share on other sites More sharing options...
borate Posted April 20, 2020 Share Posted April 20, 2020 What version of VP is being used? VP is always under improvement, and bugs are quickly addressed. Install the latest version and see if it doesn't remedy your issue. For licensed users upgrades are free for up to six months from purchase date. After that, VP will continue to fully function but a fee will be required in order to register the newest. Retain your old install file and registration info. Link to comment Share on other sites More sharing options...
Nationalsolo Posted April 20, 2020 Share Posted April 20, 2020 Hi HappyLife Version 8.23. It seems that if you reverse a normal speed clip (100%) clip it previews OK but the export stops at 99.5% Also changing the speed to 50% and reversing the export stops it at 49.5% (Hmmmm 1/2 ) Not only that as if you a change of speed to a reversed clip the export shows a still frame for the duration of the speed change.(or part of it.) Also, changing speed to 200% and then reversing shows a black window (not 16:9 )for Sequence Preview. I have reported this . The latest version may have been fixed. Nat Link to comment Share on other sites More sharing options...
borate Posted April 20, 2020 Share Posted April 20, 2020 Yes, v8.32, the current release, took care of most reverse freeze issues and further improvement is expected shortly. Link to comment Share on other sites More sharing options...
JasonP Posted April 23, 2020 Share Posted April 23, 2020 Gidday there. NationalSolo's post [re reversed clip] was right on, at least for my problem. Editing 4k drone footage and EXPORT RENDER stopped every time at a certain spot and that was where i had reversed a clip. Edited it back to how it was shot and problem solved. Also, the 4k editing work flow seems to work better than 2.7k!! Almost no buffering in the preview window. My system specs below. i7-4790 GTX 660 2 GIG 32 gig DDR5 ram Win 7 Ultimate 64 bit. Thanks a heap, NS. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now