frisky Posted December 30, 2007 Share Posted December 30, 2007 Hi just downloaded the Burn Express and have tried burning to DVD. It show's that it's burnt but the it's stuck on Verifying Burn. Does anyone know how long this takes or if there's something that needs to be done my end Any help will be much appreciated Thanks in advance Kirsty Link to comment Share on other sites More sharing options...
skid Posted January 1, 2008 Share Posted January 1, 2008 Hi I have the same problem. Downloaded software and tried to burn cd data. The burn process went OK and the files are on the disc however after the burn it goes into "verifying disc" and totally locks up the computer. Have to do a complete reset. I have disabled this function by way of the tick box but would like to have it in future. Link to comment Share on other sites More sharing options...
cmain Posted February 22, 2008 Share Posted February 22, 2008 Hijust downloaded the Burn Express and have tried burning to DVD. It show's that it's burnt but the it's stuck on Verifying Burn. Does anyone know how long this takes or if there's something that needs to be done my end Any help will be much appreciated Thanks in advance Kirsty I just burnt a DVD. The burn was pretty quick but the verification phase took ages, at least half an hour. It did eventually finish, and the DVD produced was a good one. Link to comment Share on other sites More sharing options...
cmain Posted February 25, 2008 Share Posted February 25, 2008 I just burnt a DVD. The burn was pretty quick but the verification phase took ages, at least half an hour. It did eventually finish, and the DVD produced was a good one. The second time I burnt the DVD it verified much more quickly. Link to comment Share on other sites More sharing options...
understanding47 Posted October 28, 2016 Share Posted October 28, 2016 I just downloaded Express Burn the other day. I used it this morning and the "verifying burn" has been running for almost 2 hours. Now the slideshow video I made is nearly 2 hrs and the disc player sounds like it is running, and I am sure I followed the instructions properly. Does anyone have suggestions as to what I might do? Link to comment Share on other sites More sharing options...
Abhilash Posted October 30, 2016 Share Posted October 30, 2016 I just downloaded Express Burn the other day. I used it this morning and the "verifying burn" has been running for almost 2 hours. Now the slideshow video I made is nearly 2 hrs and the disc player sounds like it is running, and I am sure I followed the instructions properly. Does anyone have suggestions as to what I might do? The DVD burning issue has been sorted out and our latest version is under testing and will be released within this week. Could you please forward your mail address so we can notify about the updated release Link to comment Share on other sites More sharing options...
Fern49 Posted March 11, 2017 Share Posted March 11, 2017 The DVD I was burning was going ok until it came to 'Verifying the burn'. Then the disc tray constantly opened consequently the photos came out all blurred. Please, what is the problem, thanks. Link to comment Share on other sites More sharing options...
James Shaw Posted April 13, 2017 Share Posted April 13, 2017 I have the same problem using Express Burn Plus to create a video DVD. During the Verifying the Burn process it will eject the disk repeatedly and pop up a message that says there is no disc in the drive. I close the dvd drive and close the message only to have it do the same thing again several times. Finally, the message "Burn Failed" pops up with the choice to insert a new disc and retry. Need a patch for this aggravating problem. Link to comment Share on other sites More sharing options...
ajjmh Posted March 5, 2018 Share Posted March 5, 2018 I have very similar issue. Everything seems to go fine then I get to verifying burn. First time it froze. Started it all again, then it went thru verification and appeared fine but that screen ended and next screen said failed to burn. This is a memorial video and funeral starts in short time HELP PLEASE Link to comment Share on other sites More sharing options...
James Shaw Posted March 5, 2018 Share Posted March 5, 2018 I switched to another product which works well for me. Problem apparently was never fixed. Link to comment Share on other sites More sharing options...
Melinda C Posted November 12, 2020 Share Posted November 12, 2020 I have tried to burn videos and they get stuck on verifying the burn. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
Michael K Posted February 20, 2021 Share Posted February 20, 2021 I have the same issue, I'm on the latest version of the Windows software -I needed todo 9 DVDs wwith verify - If you keep closing the drive, eventually will verify ok. Sometimes the verify goes through all ok, sometimes like this time its been about 7 closing the door, its on 1%, door opens, close door, 1%, door opens, close door, 1%, door opens, close door, 2%, door opens, close door, 2%, door opens, close door, 3%, door opens, close door, 3%, door opens, close door, 5%, door opens, close door, 6%, door opens, close door, 6%, door opens, close door, 7%, door opens, close door, 7%, door opens, close door, 8%, 13%, 20%, 23%, 29%...oh! yes its working brilliant --- OK , Next DVD to Burn...begin again. AND REPEAT! Normally I don't verify, but feel I should just to check DVD is ok. Link to comment Share on other sites More sharing options...
Kim 1318 Posted February 22, 2021 Share Posted February 22, 2021 In that case, I will advise you to contact the NCH Technical Support Team here: https://www.nch.com.au/support/index.html Link to comment Share on other sites More sharing options...
Robert Raine Posted February 23, 2021 Share Posted February 23, 2021 My DVD's are unreadable and always crash on verification. This problem is apparent from the number of complaints on this site. As I use both DVD-R and DVD+R I have isolated the problem to the fact that the programme does not identify the +R disc as a DVD when writing to the blank therefore it is not recognised by the DVD player. The big problem for me appears to be copying a ZOOM recording converted to MP4 (by ZOOM) It works fine on-R blanks. Yes I know the coding is missing from the +R blanks but surely this is an easy fix in the software to determine the blank put in, the required output them write the data required? Link to comment Share on other sites More sharing options...
DannR Posted February 25, 2021 Share Posted February 25, 2021 -Try burning at lower speeds (Highly effective). -Try using different brands of quality blank media like Taiyo Yuden, or Sony. -Try upgrading your writer's firmware. In the meantime lets reinstall again the program and add again the files. You can reinstall the software from the next link: https://www.nch.com.au/components/burnsetup.exe If you continue having problems contact the NCH Technical Support Team here: https://www.nch.com.au/support/index.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now