Jannierm89 Posted May 3, 2018 Share Posted May 3, 2018 Hi! I can't for the life of me figure out how to make it so you can move text around independently from the buttons for the purpose (up, down, to the sides). Can anybody help me? Thanks ? Link to comment Share on other sites More sharing options...
borate Posted May 3, 2018 Share Posted May 3, 2018 Left-click the text in the preview window ... and drag it to any position. Link to comment Share on other sites More sharing options...
Nationalsolo Posted May 4, 2018 Share Posted May 4, 2018 Hi Your text can be positioned as Borate describes. i.e. In Clip preview simply grab the text and move it to the new position. If you want it to MOVE then you will have to add an effect. e.g. Position and then use keyframes. Nat Link to comment Share on other sites More sharing options...
st11x Posted May 13, 2018 Share Posted May 13, 2018 On 5/4/2018 at 2:47 PM, Nationalsolo said: Hi Your text can be positioned as Borate describes. i.e. In Clip preview simply grab the text and move it to the new position. If you want it to MOVE then you will have to add an effect. e.g. Position and then use keyframes. Nat Hi, I am on version 6.01. I cannot make this work, what else am I missing? When I click on drag on the text, I see the bounding rectangle move. When I release the mouse button, the rectangle snaps back and disappears, and the text never moved at all. Thanks Matt Link to comment Share on other sites More sharing options...
borate Posted May 13, 2018 Share Posted May 13, 2018 Odd. Create a simple text file. Even before adding it to the time line, the lettering should be movable by left-clicking and dragging in the preview window. Clear unused cache files, under OPTIONS|DISK tab. If no joy, reinstall Videopad. This, using a beta version that apparently has corrected the problem. Link to comment Share on other sites More sharing options...
st11x Posted May 13, 2018 Share Posted May 13, 2018 It's indeed odd. I just couldn't replicate what you did in the demo. I tried clearing the cache like you suggested but it didn't work. I'll try installing the latest release. I'm on Win 10. I found a workaround which is to add a Text Effect - Position and move it to the desired position. Matt Link to comment Share on other sites More sharing options...
Nationalsolo Posted May 13, 2018 Share Posted May 13, 2018 Hi Just reloaded VP 6.01 Professional Licensed version (was using 6.10 for above posts) and checked out dragging the text. st11x is correct. A four headed arrow appears and the yellow rectangle can dragged to a new position but the text does not move with it. I have to presume the feature we are describing in our posts using VP 6.10 was not implemented in the earlier version or that version has a bug. Applying the Position effect to the text is the obvious way to proceed. Nat Link to comment Share on other sites More sharing options...
st11x Posted May 14, 2018 Share Posted May 14, 2018 Yes, I can confirm that as well. Ironically, in the newer version where you can move the text, the cursor doesn't change when you hover over the text, so you don't know that you could in fact move it. I have seen an earlier forum thread that it can be positioned and with that 4 headed arrow, so it was available prior to 6.01. Matt Link to comment Share on other sites More sharing options...
XYHC Posted September 1, 2019 Share Posted September 1, 2019 Yea, I really wish this will be fixed soon. I heavily use texts in my videos and since I got the latest version, adding texts has become a lot more time consuming. Link to comment Share on other sites More sharing options...
borate Posted September 1, 2019 Share Posted September 1, 2019 You have latched onto an old thread. If there was an issue, it has likely been fixed . Check out the latest VP version. For licensed users upgrades are free for up to six months from purchase. After that, VP will continue to fully function but a fee will be required in order to register the newest. Cannot spot the problem here. To position text hold down the left mouse button and drag the text in the preview window. Specifically, what''s not working? Link to comment Share on other sites More sharing options...
Nationalsolo Posted September 1, 2019 Share Posted September 1, 2019 Hi XYHC If you have what you say is the latest version of VP, there should be no difficulty in positioning your text Generate and add your text. Don't worry about its position in the editor. Once on the sequence track right click drag it to where you want it along the timeline. Move the mouse cursor onto the text image in the Clip Preview screen. It will turn into a 4 headed arrow. Press down and hold the left hand mouse button. The text will now have a yellow rectangle around it with a "hand" icon. Drag the rectangle to position the text where you want in the preview pane.(The "hand" will change to the 4 headed cross whilst the text is in motion.) It will automatically update the timeline (but not the clip bin image) ..... Here, the text has been moved to the bottom left of the screen and the yellow rectangle is just visible in the preview window.(Ought to be more visible...ie green or red) This is using the 7.30 Beta version of VP but the feature works OK in the latest 7.25 release. Note that animated text/titles won't work with this method and you will have to add the Position effect. Nat Link to comment Share on other sites More sharing options...
biz_kid1 Posted September 9, 2019 Share Posted September 9, 2019 I have v7.30 and confirm I cannot get the text to move around nor can I find the "position" effect. Link to comment Share on other sites More sharing options...
borate Posted September 9, 2019 Share Posted September 9, 2019 Once you have typed the text, drag the text clip from the bin (top-left) onto the sequence, if it's not already there. Click the FX button at the bottom-left of that clip. This will open the effects window. Choose the POSITION effect. In the preview window, drag the 4-headed arrow. The window and text will move. Link to comment Share on other sites More sharing options...
biz_kid1 Posted September 9, 2019 Share Posted September 9, 2019 No, there is no Position option available. And I have my 14 year-old here echoing what you're saying but witnessing what I'm seeing. However, there is a message upon launching the program that says something to the effect of not all all effects and transitions may be available and to reinstall the software, which I have already done (seems to work once then next launch, the same). So, maybe that's the trigger BUT that makes this software useless like that. Link to comment Share on other sites More sharing options...
biz_kid1 Posted September 9, 2019 Share Posted September 9, 2019 Here's exactly what the message says upon launch: Quote There was an error loading one or more of the effect or transition icons. Please reinstall VideoPad to fix this problem. If the problem persists, contact NCH Software support at http://www.nch.com.au/support/index.html Guess I'll be reaching out...maybe the other user can confirm if this is happening to them as well. Link to comment Share on other sites More sharing options...
borate Posted September 10, 2019 Share Posted September 10, 2019 That's a new one. Possible corruption. Worth checking your hard drive. At the elevated (administrative) command prompt type "chkdsk" <enter> and see if it finds errors. To get to that prompt In Windows 10, type "command" into the search bar (bottom-left of screen), then right-click on the result and choose RUN AS ADMINISTRATOR. It should report that no further action is necessary. As for Videopad, UNinstall, using this tool. Take care to delete ONLY Videopad entries. Then reinstall. That should give you a fresh start. Link to comment Share on other sites More sharing options...
Nationalsolo Posted September 10, 2019 Share Posted September 10, 2019 Hi Try this...... Open Users/AppData/Roaming/NCH Software/ Delete the Components file. Reopen VP The components file will be restored (I think you will need to be on line) and that may cure the problem. Nat Link to comment Share on other sites More sharing options...
biz_kid1 Posted September 15, 2019 Share Posted September 15, 2019 So, support had me do a clean install - uninstall from Programs, delete C:\ProgramData\NCH Software (which I didn't have before the uninstall and got back after the uninstall), delete C:\Users\(Your computer profile)\AppData\Roaming\NCH Software\VideoPad then reinstall and re-register. Position is now available (for the moment) and I can click in the Clip Preview on the text I want to move and get the dashed line around it and can move it around. So, we'll see how long this lasts, but my suggestion would be to do a clean install if you're experiencing the above symptoms. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now