Axon/Carousel Issue

[Scottly]

I have Axon running OK and can call from Extension to extension (prefix 9 then extension number). I have one extension which is a Grandstream Handy Tone -386 (Line one is connected to a standatd phone and line 2 to a fax machine). I have Extention 104 defined for Phone Line 2 (the fax machine). I can dail Ext 104 from any extension and the fax rings ok. I have now added Carousel with a 2 Port USB Voiceboard. Line 1 is our normal incoming phone line and line 2 is our fax line.

 

In the first instance, I would like calls that come in on Line 2 (Fax line) to go to Extension 104 (the fax machine). In the Properties of CAHTA 1 (hardware line 2) if I Leave the Bridge setting to "The Default Voip Number" then when I call in on the fax line the first extension in my group rings - as expected. So to achieve my initial goal I now I need to get inconing line 2 to ring Extension 104 rather than the "Default Voip Number", so I select the "This Number" radio box and enter 104. Now when I call in to the Fax Line I get this the Carousel Log:

 

Bridgeing Call

Initiated SIP Call to 104

Error Returned Not Found

 

In Axon log I can see these messages:

Incoming call failed

Unable to find any lines with the ID 104 or extensions with the ID Carousel

 

 

I also tried using 9104 as The Number (since to call another extension my dial plan looks for a 9 then strips it out to get 104, but no joy). I also tried setting the number to sip:104@192.168.0.26:5062 but also no joy.

 

It seems I am missing a vital little piece of info somewhere? Does anyone have any ideas?

 

When the above works, I would then like to add the twist of having Carousel detect if the incoming call is a fax or not a fax - if a fax then it should go to Ext 104, if not then the call should got to Ext 103 - is that possible?

 

Thanks in advance for any help.