Simon L

Hi,

It would be best to submit a support ticket for further assistance as this issue requires further analysis and troubleshooting.

You may send the support request from this link: https://www.nch.com.au/support/supportcontact.html

Hi,

Do you mean you can only export/save the file as just one type of format? 

May I know what is the format or file extension is it?

Hi,

On Debut, click the Options tab -> Hot-Keys Options -> uncheck "Remove recording controls preset hotkeys (F4-F8) -> OK.

I hope that helps.

Hi,

On the Track Controls panel (left side), click the 'headphones' button next to the FX button to monitor the recording on that track.

However, it is only available for ASIO-compatible devices.

I hope that helps. 

Hi,

When you are recording on SoundTap, try to observe the moving sound levels and see if it constantly goes over the red level.

If that's the case, try lowering the volume of the source stream (e.g. YouTube's volume control).

Observe if the results will minimize or eliminate the crackling noise.

Hi,

The program currently does not have the capability to do multi-disc labeling.

It has a file naming function but it only applies to one disc. 

Hi,

It would be best to contact NCH technical support for this as it requires further analysis.

You may reach the technical support team via this link: https://www.nch.com.au/support/supportcontact.html

Hi,

SoundTap is a separate software that you can download from the link below.

https://www.nch.com.au/soundtap/stsetup.exe

I hope that helps.

Hi,

WavePad currently does not have the capability to import effects created in Voxal.

NCH Software officially takes suggestions via the link below.

https://www.nch.com.au/suggestions/index.html

Hi,

It would be best to contact NCH technical support for this as it requires further analysis.

You may reach the technical support team via this link: https://www.nch.com.au/support/supportcontact.html

Hi,

It would be best to contact NCH technical support for this as it requires further analysis.

You may reach the technical support team via this link: https://www.nch.com.au/support/supportcontact.html

Hi,

You can mix them in MixPad similar to a mixtape. You may refer to the video tutorial from the link below on how to do that.

https://www.nch.com.au/mixpad/tutorial.html#mixtape

I hope that helps.

Hi,

It would be best to submit a support ticket for further assistance as this issue requires further analysis and troubleshooting.

You may send the support request from this link: https://www.nch.com.au/support/supportcontact.html

Hi,

Do a right-click on one of the notes connected by a beam -> Beams -> Above/Below.

I hope that helps.

Hi,

WavePad mainly records from recording devices such as microphones.

For recording from audio being streamed on your computer. It would be best to use SoundTap. 

You may check the link below for more information about SoundTap.

https://www.nch.com.au/soundtap/index.html

I hope that helps.

Hi, 

VideoPad does not have the capability to download media from streaming sites.

If you already have the downloaded video file, you can open that file in VideoPad and save the audio clip as a new file.

If you haven't downloaded the video yet, you can use our SoundTap Streaming Audio Recorder to record the audio from the streaming site.

You may check this link for more information about SoundTap: https://www.nch.com.au/soundtap/index.html

Hi,

It would be best to submit a support ticket for further assistance as this issue requires further analysis and troubleshooting.

You may send the support request from this link: https://www.nch.com.au/support/supportcontact.html

Hi,

Unfortunately, as stated in this link: https://www.nch.com.au/switch/kb/1405.html, "Not all DVF recorders are supported".

If the recorder used is one of those not supported, there is nothing that can be done about it.

Hi,

WavePad mainly records from recording devices such as microphones.

For recording from audio being streamed on your computer. It would be best to use SoundTap. 

You may check the link below for more information about SoundTap.

https://www.nch.com.au/soundtap/index.html

I hope that helps.

Hi,

It is currently not possible in the program. 

NCH Software formally takes suggestions via this link: https://www.nch.com.au/suggestions/index.html and it will be directly sent to the development team. That's the best way to ensure that your idea is evaluated for possible inclusion in a future release.

Hi,

It would be best to submit a support ticket for further assistance as this concern requires further analysis and troubleshooting.

You may send the support request from this link: https://www.nch.com.au/support/supportcontact.html

Hi,

You can use WavePad's Batch function where you add all the files you want to edit, and add the edit commands you want, and it will apply to all the added files.

You may refer to this help link for more information: https://help.nchsoftware.com/help/en/wavepad/win/batch.html

Hi,

MixPad currently does not have the Redact/Beep feature WavePad has. You can use WavePad to edit the curse words using Redact/Beep then load the edited clip back to MixPad for mixing.

Alternatively, you can set a track and place beeping tones on top of the track main track where the curse words are said.

Let us know if that helps.

Hi,

It would be best to submit a support ticket for further assistance as this issue requires further analysis and troubleshooting.

You may send the support request from this link: https://www.nch.com.au/support/supportcontact.html

Hi,

The program does not have the capability to import PDF files.

It can only export them.