bennyzhou
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by bennyzhou
-
-
We are still working on a solution for DTMF. The Skype API does not expose DTMF data so we are coming up with a work around. Should be available in v1.3
I saw a option for "number of simultaneous calls allowed = 10". What does it mean? I tried to make a second call through skype, but Uplink gave engaged tone.
-
And now its up and ready for download.
Thanks. Better than 1.1. Only one question. How to send DTMF this way?
Skype -> Skype -> Uplink -> SIP PBX
-
I would like to make sip calls using skype software. How can I do this using Uplink 1.1?
I put my sip parameters and Uplink now can register in sip network. What should I do next?
DTMF issue makes this very hard.
-
I'd similar problem while run the uplink in WinXP. Runnig Uplink in Win2k is okay. But I still can't use it because after the incoming call sent to my SIP client, the skype will drop the line by reason "sound device problem". In fact I can hear the first few word before the line was dropped. So the problem was my Skype (2.0x & 2.5) do not like device "uplink" as its sound device.
tried skype 2.6 and uplink, skype froze
2.5 and uplink have no such problem
-
What audio compression codecs does Uplink support?
alaw ulaw
-
you need to add the "+" to have skype dial outbound
In skype, "+" is equal to "00". Just add something like
00+N.
in your dial pattern
-
I didn't have this problem when I first installed Uplink and Axon a while ago. There was just the freezing problem.
I tried to give it another chance with the latest version.
I configured Axon and Skype according to the NCH suggestions http://www.nch.com.au/kb/10034.html
There is a usual phone connected to a Fritz!Box SIP adapter, that registers to Axon at extension 101.
If I call Skype test service, I can't hear anything. However, the phone's microphone seems to work. Because if I change the audio out device to standard in Skype, I can hear through my computer's speakers and I can record through my phone microphone on Skype test service.
I tried to record the call with the VRS that NCH offers, to find out if the problem might be somewhere between Axon and my SIP adapter. Interestingly, if the Skype audio out device is set to Uplink, I can record some seconds of voice from the other side-but then there is silence. I won't hear anything through the phone speaker the whole time.
If I set the Skype audio device to standard, the VRS will record the whole call and I can also hear everything through my PC speaker.
Very strange behaviour.
I guess there is no solution to this by now. Maybe in a year there will be a working version.
But who knows. So if you can help, please tell me what I could try.
uplink works better with Asterisk. You may try Trixbox in VMware. Very fast.
-
Someone could be so kind to post a complete working example how to configure Uplink and Asterisk?
I have tried it, but calling from Skype to Asterisk returns error: "Not Found" "Call has disconnected" on Uplink.
Thanks a lot in advance!
Piero
This is my working conf
[skype]
allow=alaw ;use ulaw if you are in North America
canreinvite=yes
context=from-trunk
disallow=all
host=dynamic
nat=yes ;very important. uplink won't work without this
secret=5506 ;define your own password as in uplink
type=friend ;send or receive calls
username=skype ;make sure this is same to trunk name
-
There must be someone out there that has sorted out how to get this piece of software to work.
I'm totally frustrated with it.
Maybe someone can talk me through the problems I'm having.
I would like it to work with both Skype and Gizmo.
Robert
only successful with asterisk.
-
1._ Does uplink support DTMF relaying from SIP/H.323 to Skype?
2._ Does uplink support DTMF relaying from Skype to SIP/H.323?
3._ Does uplink support DTMF bypassing from SIP/H.323 to Skype?
4._ Does uplink support DTMF bypassing from Skype to SIP/H.323?
Thanks, Darly
sip to skype is fine
skype to sip is not working
Uplink/Skype not talking
in Uplink Skype to SIP Adapter
Posted
In skype, you can alway input "00" intead of "+"
There is no need for “added the '+' and country code as a prepend entry in the default dial plan in the Axon web control panel"
If you want to send "+61xxxxxxxxx" to skype, just dial "0061xxxxxxxxx".