meent
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by meent
-
-
Hello Simone,
I have it working with the following rules.
Remote extension: SIP 5080 and RTP 8000
--
Router Axon network: SIP UTP 5080-5083 Wan site> SIP UTP 5060-5063 Lan site
Axon SIP 5060 and RTP 8000
Port 5060 Wan site I used for other applications.
Succes and regards Cor
-
I have Axon with a win2k and win2k3 server. When I start Axon the CPU usage is low (normal). After the first call between two extensions the CPU usage goes to 90-96% and stay always on this percentages. When I close the Axon application the CPU is going low. I check the CPU with (ctrl-alt-del) (Task Manager). Are there more people with the same problem?
-
I was not able to find the firmware upgrade any hint please, or anyone can email it to me
Hello, remove the last 8-digits and you will see.
-
I was not able to find the firmware upgrade any hint please, or anyone can email it to me
Hello, remove the last 8-digits and you will see.
add an extension outside my LAN
in Axon
Posted
Hallo,
In my case, I have on the remote extension (i.e. Express Talk in Network design) set SIP on 5080 and RTP 8000.
In the router on Axon site I have a portforwarding/porttranslation UDP 5080 (81,82,82) to inside LAN IP address 5060 (61,62,63) [[i use port 5060 WAN site on router for a other Voice application]]
In de router on Axon site I have a second portforwarding UDP 8000,01,02,03 to insite LAN IP address 8000,01,02,03
In the Axon PBX I have in Network design SIP 5060 and RTP 8000.
So I hope it work, perhabs you can set in remote extension and in router SIP port UDP 5060 in case 5080, please try it.
Succes, regards Cor