Joecrew

How can I configure an OGM to automatically access a specific mailbox. My situation is I am testing IVM with my PBX. When someone calls a number on my PBX it is routed to that phone and if a busy/no answer condition is met then the call is transfered to the IVM port. IVM picks up and the sending PBX ports sends DTMF tones (which I can configure as needed) to identify what mailbox to leave a message. After the message is left the message light code is sent from IVM and turns on the phones light. Now when the person presses that msg light it calls the IVM port and can send DTMF tones to identify what mailbox needs access to, but I don't know how to set this up. The option to access a mailbox only allows for "prompt for mailbox" or have a predefined mailbox. I need a variable mailbox option. My current VM system uses the first two digits (91xxx means leave a message for ext xxx, 92xxx means access mailbox 92xxx). When the PBX access the current mailbox with the 92 code it doesn't prompted the user for ther ext num, just the access code. So my end goal would be to have my OGM's set up to have the first one get the DTMF's from the PBX and route to other OGM's based on the first two digits and those OGM's use the last 3 digits ( in required) to do different functions (leave a message, retrieve messages, play a company greeting, etc.) Joe S.

Thank you, I believe i have it working now.

Yes I can program the PBX to send any DTMF tones I need and I see them being heard on the IVM screen, but now it appears that they are not being put in the variable so as to route to the test mailbox I have set up. It just plays the default message like it never recieved any input. I have tried several different combinations of DTMF input and IVM configurations but I must be missing something. My test is to call my PBX and transfer my Busy/No ANswer to the VM port with the ext # 399 as the DTMF tones. IVM picks up, i see the 399 as being input but it goes to the default message and not to the 399 mailbox. any ideas Joe S.

I currently have a Toshiba PBX system (non-VOIP) that is connected to an external "Amanda" voice mail system. My current VM systems is having problems and I am looking at IVM as a possible solution. My problem is setting it up to test how it will work on my PBX. I have 4 analog ports on the PBX that handle all voice mail. All my extensions (90+) are configured to transfer to one of these ports (if any are free) if there is a busy/no answer at the extension. The current system uses a 91xxx (where xxx is the extension) to indicate a leave message command and an 92xxx when to retrieve message (access the mailbox). I haven't been able to find how to configure IVM for this role. I have connected it to a spare analog port on my PBX. I can call that number and I can get the default OGM. Then I configured one of my other extension to transfer to this port on a busy/no answer but I have not been able to figure out how to configure IVM to not play a greetingand just listen for the DTML tones and route to a VM box that I created. Also is there a way to use the call simulator to call the IVM and be able to input the DTML that the PBX would be sending to test out various calling patterns. Thanks for any help anyone can give, Joe S.