Express Talk with ATA

[misty_man]

Hi all

I am new here ..

I installed Express Talk softohone, & it's working fine with me, receiving, dialing out ..etc

 

I need to install it on my LinkSys ATA,

any help in in how to configure it ?

 

have a nice day

[pythonpoole]

The first thing to understand is the ATA device is completely separate to Express Talk and they work completely independent of eachother.

 

There are many Linksys/Cisco/Sipura ATAs out there, and I only know how to configure the Sipura ones (which should be somewhat similar to the one you have).

 

If you haven't already done so log into your Linksys ATA by navigating to its IP address in your browser. If you don't know the IP address, you might be able to pick-up the phone attached to the device and dial * * * * (keep dialing even if it starts beeping). I'm not sure if this works for all Linksys devices, but for the Linksys/Sipura 3000/3102 ATA you can use the * * * * to get into a voice menu, and then you can enter 110# to hear the devices IP address.

 

In the web configuration page, you should see several options.. the following are the ones that need to be configured:

- Proxy: textbox needs to be changed to the SIP server/domain address of your VoIP service

- User ID: textbox needs to be changed to the username or SIP number you have from your VoIP provider

- Password: Fill in with the password you have set with your VoIP provider

 

If it still does not work or register properly (as displayed on the status page) it may be necessary to configure additional settings such as a STUN server, Enabling Nat Mapping and Keep Alive features, etc.