KorporateFox Posted December 6, 2007 Share Posted December 6, 2007 I figure this may be a port problem so I changed them but no effect. The units are set: SPA3102 Unit one SPA3102 Unit Two Line 1 Registered=Yes Line 1 Registered=Yes Line 1 Port = 5070 Line 1 Port = 5072 UserID=FXS1 UserID=FXS2 PSTN Port=5060 PSTN Port=5061 PSTN Registered=Yes PSTN Registered=Yes UserID=FXO1 UserID=FXO2 Dial Plan (S0<:FXO1>) Dial Plan (S0<:FXO2>) Axon sees and registers Extension FXS2 In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061 The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected. The second unit just keeps on ringing. Any clues anyone ? Link to comment Share on other sites More sharing options...
KorporateFox Posted December 6, 2007 Author Share Posted December 6, 2007 I figure this may be a port problem so I changed them but no effect. The units are set: SPA3102 Unit one SPA3102 Unit Two Line 1 Registered=Yes Line 1 Registered=Yes Line 1 Port = 5070 Line 1 Port = 5072 UserID=FXS1 UserID=FXS2 PSTN Port=5060 PSTN Port=5061 PSTN Registered=Yes PSTN Registered=Yes UserID=FXO1 UserID=FXO2 Dial Plan (S0<:FXO1>) Dial Plan (S0<:FXO2>) Axon sees and registers Extension FXS2 In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061 The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected. The second unit just keeps on ringing. Any clues anyone ? Whoops - Sorray about that. The formatting went to crap! I will try again. I figure this may be a port problem so I changed them but no effect. The units are set: SPA3102 Unit one. This works and inbound calls answer normally Line 1 Registered=Yes Line 1 Port = 5070 UserID=FXS1 PSTN Port=5060 PSTN Registered=Yes UserID=FXO1 Dial Plan (S0<:FXO1>) SPA3102 Unit Two, This doesn't work. Outside calls just ring endlessly. No entry Axon logs Line 1 Registered=Yes Line 1 Port = 5072 UserID=FXS2 PSTN Port=5061 PSTN Registered=Yes UserID=FXO2 Dial Plan (S0<:FXO2>) Axon sees and registers Extension FXS2 In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061 The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected. The second unit just keeps on ringing. Any clues anyone ? Link to comment Share on other sites More sharing options...
bda Posted December 23, 2007 Share Posted December 23, 2007 Whoops - Sorray about that. The formatting went to crap! I will try again.I figure this may be a port problem so I changed them but no effect. The units are set: SPA3102 Unit one. This works and inbound calls answer normally Line 1 Registered=Yes Line 1 Port = 5070 UserID=FXS1 PSTN Port=5060 PSTN Registered=Yes UserID=FXO1 Dial Plan (S0<:FXO1>) SPA3102 Unit Two, This doesn't work. Outside calls just ring endlessly. No entry Axon logs Line 1 Registered=Yes Line 1 Port = 5072 UserID=FXS2 PSTN Port=5061 PSTN Registered=Yes UserID=FXO2 Dial Plan (S0<:FXO2>) Axon sees and registers Extension FXS2 In External lines the FXO2 Line has has the proxy pointing to 10.110.30.253:5061 The first unit rings, answers incoming PSTN traffic and passes it on to Axon as expected. The second unit just keeps on ringing. Any clues anyone ? Hello, The Line 1 port should be 5070 (assuming that is the port configured in your axon server) The proxy should point to 10.110.30.253:5060 (not 5061, because the axon server is expecting in port 5060) The first one is working but is better to change the PSTN port to 5061. Hope it helps Bruno Abreu Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now