Support For Asterisk E1 cards

[geniune]

It would be graet If you add support for asterisk cards like FXO / FXS / E1

 

 

Thanks

[pythonpoole]

Well I don't know about Asterisk cards, but when you use Carousel in combination with Axon, you can interface with many hardware telephony boards such as CAHTA, CallURL and Synway cards.

[geniune]

Its a single port 30 cahnnels card. It habdles 30 channels over a single R 45 port.

 

you can find information at www. sangoma.com

model a101

 

 

Well I don't know about Asterisk cards, but when you use Carousel in combination with Axon, you can interface with many hardware telephony boards such as CAHTA, CallURL and Synway cards.

[mperdue]

Its a single port 30 cahnnels card. It habdles 30 channels over a single R 45 port.

 

you can find information at www. sangoma.com

model a101

 

The asterisk card's are actualy by digium (www.digium.com) I have a 4 port pri card and a 1 port pri card. I'm not happy with the asterisk software. I posted in another forum if I could allow my assterisk box to just be the sip gateway and then rely on axom to do call routing/registrations etc etc in antohe rpost.

[megatech]

It would be graet If you add support for asterisk cards like FXO / FXS / E1

 

 

Thanks

 

You can plug a T1 into a Total Access 924e router which has 24FXS ports - plug these ports into your AXON supported CAHTA analog boards - and everything works great. You can easily split your t1 into voice and data with this router - say you want 12 PRI and the rest as data.