JerseySax Posted July 15, 2022 Share Posted July 15, 2022 Hi, I'm new to the Home Studio gig. I'm using Wavepad to playback tracks while I record (sax). I have set up the FX for the recoding track, but do not hear them in the monitor(s) either at the interface headphone jack or output at speakers (while recording). What do I need to set to hear the FX while recording. Thanks JerseyGeorge Link to comment Share on other sites More sharing options...
DannR Posted July 18, 2022 Share Posted July 18, 2022 If you are using ASIO hardware then you can choose the "Monitor channel" which will allow you to hear what you are recording through your headphones. However, a better approach to monitoring your recording is to use your hardware directly. Most external soundcards will allow you to directly monitor your input via a headphone output. This option will provide you with the best performance and zero latency." To use Monitor channel in Mixpad, you will need to: 1 Use an ASIO device. 2 Setup the Monitor channels as shown in the image. 3 Enable the headphone button as shown in the image. Than you will hear the same sound from the Recording device. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now