Jump to content

Inventoria To Copper PoS


Recommended Posts

Hello,

Follow the steps below to sync Inventoria with Copper:

From Inventoria:

1) Select the Options icon from the main window,
2) Select the "Other" tab
3) Select the "Advance settings" tab 
4) Check mark the box that says "Allow Express Accounts...to sync with Inventoria"
5)  Enter your Access Authentication code. This could be any number, please use 12345
6) Click OK, 
7) Select the Web Access tab and check mark both cases "Local Network" and "Internet". Under "Current status" you will probably get a red status message, no worries, you won´t need to take any other steps.
8) Take note of the Local network IP number, for instance, on our end is 192.168.153.1 and the port 1097.
9) Click OK to finish and leave Inventoria Open.

From Copper: 

1) Open the Options menu and select the Sync - Apps network tab.
2) Check mark both cases "Local Network" and "Internet", run the Wizard, you will probably get a red status message, no worries, you won´t need to take any other steps.
3) Click the Sync Apps tab and check mark the "Synchronize this installation of Copper as a client of Inventoria" option.
4) Enter the Access authentication code 12345
5) Enter the IP number of the server program, for example: 192.168.153.1
6) Enter the Port number of Inventoria 1097
7) Click the "Update Now" tab, and agree to Update, you should get an "Update Successful" message.
8) Select the "Retrieve locations" tab, select the location from the drop down and click OK.  

Regards.

Link to post
Share on other sites
  • 2 weeks later...
  • 1 month later...

Much appreciated ELK

On 4/19/2018 at 4:18 AM, elk said:

Hello,

Follow the steps below to sync Inventoria with Copper:

From Inventoria:

1) Select the Options icon from the main window,
2) Select the "Other" tab
3) Select the "Advance settings" tab 
4) Check mark the box that says "Allow Express Accounts...to sync with Inventoria"
5)  Enter your Access Authentication code. This could be any number, please use 12345
6) Click OK, 
7) Select the Web Access tab and check mark both cases "Local Network" and "Internet". Under "Current status" you will probably get a red status message, no worries, you won´t need to take any other steps.
8) Take note of the Local network IP number, for instance, on our end is 192.168.153.1 and the port 1097.
9) Click OK to finish and leave Inventoria Open.

From Copper: 

1) Open the Options menu and select the Sync - Apps network tab.
2) Check mark both cases "Local Network" and "Internet", run the Wizard, you will probably get a red status message, no worries, you won´t need to take any other steps.
3) Click the Sync Apps tab and check mark the "Synchronize this installation of Copper as a client of Inventoria" option.
4) Enter the Access authentication code 12345
5) Enter the IP number of the server program, for example: 192.168.153.1
6) Enter the Port number of Inventoria 1097
7) Click the "Update Now" tab, and agree to Update, you should get an "Update Successful" message.
8) Select the "Retrieve locations" tab, select the location from the drop down and click OK.  

Regards.

Much Appreciated

Link to post
Share on other sites
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...