Search the Community
Showing results for tags 'text'.
-
Hi. I have a text scrolling from top to bottom. I need to make it stop at a certain point on the screen without completing the full scrolling. How can I do it? I need some detailed instructions on the use of the position effect. Thanks in advance.
-
Hello there, many times when I finish entering a text and I click anywhere outside the box, the text jumps and I can't put it back to it's place. Can anyone help me with this please?
-
Hi guys, I have two 7 second text files I need to insert into a 10 second gap on my time line, I've tried to squeeze them in but it just mucks up the rest of the project, can you tell me how to insert them without affecting the rest of the project? Is there a way of making the gap bigger to accommodate? Gap in picture... https://ibb.co/tqXMfjd Update, when I freeze the video tracks around the one I want to add the text files to, I copy the text files but the paste "insert" feature dissapears, must be to do with the locked tracks... https
-
Hi guys, I have two 7 second text files I need to insert into a 10 second gap on my time line, I've tried to squeeze them in but it just mucks up the rest of the project, can you tell me how to insert them without affecting the rest of the project? Is there a way of making the gap bigger to accomodate? Gap in picture... https://ibb.co/tqXMfjd Thank you!!
-
I want to re-use many of the images (text files) in previous projects in a new project (I create a new church worship project & video each Saturday) and I want to re-use many of the text images I have created (such as "Lord's Prayer" text for the clip). Can I access these from a previous project and include them in the new project for the week? Would they be part of the project template?
-
I am trying to make a danger sticker for motors we install. When I am adding the text to the 2" square label it looks fine. as soon as I move on to another field (when the box disappears) is gets pixelated. I tried to make my label 8 inches square and then shrink It. Still looks the same? I am using Arial Bold font
-
I purchased the new version recently, and now the text appears jumbled. For instance, in Dm7, the "m" is squashed so tightly between the "D" and the "7" that it is hardly visible. I also am unable to insert spaces between words. I have had to insert underscores instead as in "I'll_Remember_You." In the Dm7 example above, I have resolved it by typing D_m_7. What is going wrong?
-
mac用の Version 4.05 をダウンロードして使い始めてみましたが、Textボタンでテキストボックスを作成しても、文字の入力が全くできません。フローチャートのオブジェクトをダブルクリックして作成したテキストボックスについては、文字入力個所の点滅カーソルさえ現れません。 なお旧Version 3.04 をダウンロードして試してみたら、英文では文字入力できましたが、日本語が入りません。 ちなみに、使用環境は iMac (Mid 2011) OS は10.7.5です。また、MacBook Air OS 10.9.5 で試してみても全く同様の状態でした。 このような状態について、なにか情報はないでしょうか? 対処方法は?
- 3 replies
-
- clickcharts
- mac osx
-
(and 1 more)
Tagged with:
-
Good afternoon, I've just upgraded to the new version of videopad and am finding the new text colour system really tricky, is there a tutorial somewhere I could consult? With my old version of videopad, I swear it was far easier, now I just seem to get dirty muddy looking colours... Thank you,
-
If you can add outlines and shadows on simple text clips, then why can't you do the same for animated text clips/titles? That would be cool!
- 5 replies
-
- text
- animated text
-
(and 3 more)
Tagged with:
-
I am trying to add text to a connector. According to the help document (p.7) and to the 'Adding Text ...' video tutorial, after I click the Text icon at top of page and then click on a connector, I should see a green bubble indicating the attachment point of the text box. That green bubble does not appear on my screen, so I am unable to associate text with a connector. I have tried reinstalling the software and I have restarted my laptop. I have also checked the FAQ and the Forum. All to no avail. Has anyone else encountered this problem? Windows 7. ClickCharts 3.14
-
So i know how to use the effect to move the text around over the period of a few seconds etc. What i cant figure out is why sometimes i can drag the text around to where i want it to start and other times i have to use the alignment tools instead. I have no idea why it works sometimes and doesnt other times. Any help?
-
Hey all.... Just trying to figure out a problem with a text transition. Once a text block is inserted it is easy enough to zoom in on it enough such that the transition icons show at each end of the clip, and can be clicked to open the transitions window. Once the text fade-in and fade-out are set, I can adjust them further by pulling the edge of the black transition bars along the top edge of each end of the text clip. However, on the text fade-out, even if I pull the bar longer (to the left, in other words) so that the fade-out starts sooner, and with the goal of making the fade-out las
- 4 replies
-
- transition
- fadeout
-
(and 1 more)
Tagged with:
-
Hi When writing a Hebrew title in the 'text clip' if a comma or a dot or any anther character is needed at the end of the line it pop to appear at the beginning of the line. In order to change it I am arranging that the line at the title will be ending with a word. And that the character will be at the middle of the title. But is is funny & not professional. I am using 3.89 version and do not want to change it if not necessary. Many Thanks Sharona
-
Is there a way to resize the video height in order to add a header and footer block to place text that can be shown for specific periods of time? I'm not talking about putting text inside the video itself, but about adding a new header section with text above the current video, and/or adding a footer section below the video, where text can be added throughout the video. Like this...
-
I use a Mac and love Express Scribe but the font size in the transcription text area is sooooooo small it hurts my eyes and makes it difficult to catch mistakes and read back. I know I can zoom in on the monitor but the resulting fonts are not very crisp. Does anyone know how to change the display size for Express Scribe -- either by increasing the font size or increasing the display percentage to 200%? I should note that I have a large, high resolution monitor. I'm not sure why that functionality is nowhere to be found...at least not by me. Most other text editors have the font set
-
Hi, I need help here, I have a tutorial video that am working on. I want to be able to put a circle or underline on the word or something I want my audience to put their attention to. Is there a way to do that please help. Thanks in advance for your quick response
-
I am new to PhotoStage and would like to bulk edit the size of the photo/slide font on all photos/slides but I can't find a "change all" operation. I appreciate the help.
-
What exactly is the purpose/function of the Speech-To-Text function? I don't understand how this works if I have a few transcriptions and need to get through the bulk of them before revising them. Can someone please guide me on how to use the Speech-to-Text function; and if that is not its purpose. Please tell me what exactly its there for?
-
- speech. to
- text
-
(and 2 more)
Tagged with:
-
v5.01 If I add (centered) text where the first line is 13pt and the second line is 23pt the space between those lines can be HUGE - and there's no easy way of reducing it. I've tried adding a line in-between them of, say, 5pt or less, to get the spacing correct which appears to work in the preview. Save and reload the project and the spacing is back to the huge leading again. I'd first of all like to see this behaviour fixed so that each line just printed whatever point size has been selected (like Word) without huge spaces between lines of text. Secondly, as a feature impr
-
Hello, I am new here and hope this is the right place for my question. Using "Videopad editor" I'm trying to 'put' text (moving or stable) on top of a video clip. When I click the text button, a text clip is opened but the bacground is sort-of Blue-Purple - not transparent. In the video tutorial of the program it shows the text clip background is transparent. If I try to make the text clip in the program transparent, it maks also the text transparent. When I load this text clip on a second time-line the video clip is slightly coverd with Bluish 'screen'. My OS is
-
Something I believe is possible in Camtasia but I'm not sure, I would like to have the option to alter the background transparency in text clips and subtitles, instead of just changing the color. Without the background, the text can be hard to read when it's in an area with the same color because the shadows and outlines aren't big enough; and with the background, you end up blocking part of the video and the text looks like it was just hurled on there.
- 7 replies
-
- Text
- Background
-
(and 1 more)
Tagged with:
-
I'm using the free version of Click Charts which I've used occasionally over the past several years. I downloaded the latest version as I had not installed it since I purchased this computer a few years ago. When I opened an older chart, the text wrapping did not work correctly in that lines would wrap in the middle of a word. I tried creating a new chart thinking it might be a version issue but the same thing happened with flow chart shapes and with plain text. Any ideas?