Search the Community

OK - so my Infinity IN-USB-2 foot pedal which worked fine since 2014 with Express Scribe Pro has for the last few months been intermittently 'dropping out'. It works fine for a couple of minutes then cuts out. I've just spent £20 upgrading to the latest version of Express Scribe 6.0 in case that was an issue but the same thing happens. Have checked set up, Windows 10 Power Management, Device troubleshooting etc, etc. Everything comes back - 'no problem'. I work professionally as a transcriber so before I order another foot pedal I want to check if there are any known software conflicts that could cause this kind of issue. I note there are lots of users who use this foot pedal with Express Scribe Pro who have had similar issues going back over five years. I would really, really appreciate an urgent and full response to fix this or at least a work through to eliminate potential problems - and yes I have read all the guidance on your site for this pedal, checked and double checked! Thanks in advance. Below are the Plug and play controller diagnostics for Express Scribe Transcription Software (Registered) v 6.00 (Windows 10.0) as at 14th June last night. USB device Vendor ID: 0x05F3 Product ID: 0x00FF Revision: 0x0120 Product string: VEC USB Footpedal Path: \\?\hid#vid_05f3&pid_00ff#6&296aa5b0&4&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xC Usage ID: 0x3 Model data: N/A Key: VECInfinityINUSB Company: VEC Model: Infinity IN-USB-1 / IN-USB-2 Allowed: Yes USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_02&col01#7&21c0253d&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xFF00 Usage ID: 0x1 Model data: N/A Key: N/A USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_02&col02#7&21c0253d&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xFF00 Usage ID: 0x2 Model data: N/A Key: N/A USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_02&col03#7&21c0253d&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xFF00 Usage ID: 0x4 Model data: N/A Key: N/A USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_01&col02#7&7983eec&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xC Usage ID: 0x1 Model data: N/A Key: N/A USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_01&col03#7&7983eec&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0x1 Usage ID: 0x80 Model data: N/A Key: N/A USB device Vendor ID: 0x046D Product ID: 0xC52B Revision: 0x2401 Product string: USB Receiver Path: \\?\hid#vid_046d&pid_c52b&mi_01&col04#7&7983eec&0&0003#{4d1e55b2-f16f-11cf-88cb-001111000030} Usage page: 0xFFBC Usage ID: 0x88 Model data: N/A Key: N/A --- End ---

Y aurait-il quelqu'un qui pourrait me dire comment il se fait que je sois capable de lire des fichiers audios avec mon pédalier Infinity installé, mais lorsqu'il s'agit de fichiers vidéo, il m'est impossible d'utiliser le pédalier. Merci.

I am using an Infinity IN-USB-2 pedal. This is working on my computer; it is working with Express Scribe. For my work, I need to use PedalWare on a voice file playing in a third party website, Ascribe. When I download and run PedalWare, it cannot detect that my foot pedal is plugged in, even though it is working. I duplicated the prodecure on another computer where the Infinity IN-USB-2 foot pedal works, and it could not be detected there. Can you suggest any next steps? The pedal is not detected regardless of the port it is plugged into. Thanks you.