Search the Community
Showing results for tags 'HELP'.
-
As the title says, Voxal is recording properly, and is using the microphone fine, but for reasons unknown to me, it won't apply any filter I select, and when I do record my voice, it isn't showing my mic level as I record either. Any help that can be provided would be greatly appreciated.
-
Okay, so I'm having an issue where I may have accidently changed a setting. My computer isn't muted, I can hear everywhere else but on vidopad, the audio is linked. Also, the audio bar is moving as I should hear, but I can't. I cannot trim and edit at all if I can't hear PLEASE HELP I NEED IT IN A FEW HOURS! Also, I have the version 8.99 if I need an older version please tell me how to download it. -
I just bought 6.14 in February. I thought it worked back then but I haven't used it much. I need it now. Maybe I'm doing something wrong. I want to screen record my site online to make a video illustration. When I open the software, I get a smaller black box inside the black screen. When I hit record, it stays black. I have to hit record and click to go online while recording. It never shows the online picture in the smaller picture. This makes this product completely useless for what I need now. Secondly, the highlighter only shows on the small black screen and not on my screen reco
-
For a project that I'm doing for class we all need to have the same background but I wasn't able to get the background to work during our zoom recording. How do i change my background on Videopad to match those of my classmates. I just need my background changed. I can put the image over my face but not set it as the back ground itself. Is it even possible?
-
Hi, I recently upgraded VideoPad so that I could export to .MP4 and .MOV instead of always having to do .WMV, which takes a long time and kills the video quality. However, after exporting to BOTH .MP4 and .MOV, BOTH videos have glitches. The video completely cuts out and goes to a blank green screen for a second and then returns. Or there is a flash of pixelation like an old TV with a bad signal. Then it will go back to normal for a few seconds, and then cut out again. When I am editing the video in VideoPad, this does not happen in the preview. It only happens in the exported file.
-
reinstall Can't find my Registration Code after Reinstall
Neptali Casaretto posted a topic in VideoPad
Procesando tarjeta de crédito: Esto puede tardar hasta 5 minutos. No intente retroceder. Procesando tarjeta de crédito: Si después parece que se 'cuelga', entonces revise por favor su correo electrónico. Procesando tarjeta de crédito: Por favor espere... Procesando tarjeta de crédito: Transacción con tarjeta de crédito AUTORIZADA. La compra del software HA SIDO EXITOSA Sus códigos de registro han sido emitidos (abajo). Para completar el proceso, los códigos de registro deben ser introducidos en el software. Siga las siguientes instrucciones debajo del código de registro para ha -
Hello, I've been using Voxal for some time and i thought it would be nice if it had a narrator voice, any suggestions about what should i add to the custom voice to make it like a narrator one? (Deep voice, kinda like every voice in movie trailers)
-
Every SINGLE time I use the zoom effect, it always stretches up and makes it look unnatural. In the video editor it looks fine, but when I convert the video file it does the glitch. It doesn't matter what resolution or what video file I convert it to, it ALWAYS does this. I've reported this bug to NCH Software and I've gotten no replies. Please help me if you know what could. Thank you!
-
Help. I have successfully used the split screen function while creating a multi-faced choir. I am now creating a 5x5 with 25 separate clips on separate tracks. I am on the 25th clip and VP automatically (and undesirably) changes the aspect ratio of my sequence and all other clips in the 5x5 grid from 16:9 to something vertical - presumably 9:16. How do I keep this from happening? This is very frustrating at the end of my project! Thanks.
-
Please help! I am new to this Forum. I'm not very Tech savvy, but I'm happy for accomplishing as much as I have. I have been using VideoPad for a few years and upgrading as needed. I just upgraded to version 8.71 and I have three videos I need to get done soon. The problem is after exporting a video, I'll review it to make sure everything is correct. But after upgrading, the video will play for only 2 or 3 seconds and then the frame will freeze while the audio continues on. I've reported this issue as a bug and downloaded the patch version they offered only to have the same results each time
-
I made two files, totalling one hour of audio. I stopped the recording of the second one and FORGOT to export the project. Without thinking, out of habit I closed Mixpad and it asked if I wanted to save so I said no and it closed. Is there a way to still access these two files? Are they saved anywhere else on the computer even though I said no to the save option?
-
Hi so I've been working hard on this project and I finally finished it I'm getting paid to edit a video and when I went to export it the only thing I got was a 1 sec audio clip of the beginning of my video how do I fix this I tried doing it on google drive and youtube but again I only get a 1 sec clip please help
-
Hello everyone. In this period I have a problem with VideoPad: I can see the video but I can't hear the audio. I searched online and saw that it is a common problem. I also found a discussion on this forum (http://nch.invisionzone.com/topic/22431-video-but-no-audio-whatsoever-resolved/), but I did not quite understand what the solution was to this problem. Could you help me? I'm not good at computer science, so could you explain the solution simply? Thanks so much.
-
so i made a gaming video with my friend and when i was editing it everything was fine i could hear our voices and i put some backround music in. THEN when i was posting it on youtube, i noticed that when i went to see the vid on vlc, i could hear the backround music but not the voices. then when the video posted it was the same thing. please help.
-
Hey, when we were editing yesterday; it had a line when we were editing it then it changed it to green little line on the right side, our videos are ok but we would like to know what is the Green line and how we can get it off of our new videos! Thanks
-
HI I NEED URGENT HELP WITH EXPORTING VIDEO - DEADLINE TODAY VIDEO EXPORTS AS BLANK SCREEN AND AUDIO ONLY . I have paid for full version and dont want my money wasted!! I usually export videos on Videopad and its completely fine. But I have now finished a video and need to download it - I have a tight deadline which is today. Please help me, I'm not very technical, I just need a quick fix. Thank you so much Mia
-
I just started using VideoPad a few days ago, and I am amazed at its power, considering the price. I am using VideoPad Professional v 8.42 There are three of things with the snow effect I would like, and perhaps someone here knows how to do it. 1) Presently, the snow effect begins at the top, with nothing, and then slowly fills the screen as the snow falls. Is there any way to have the snow already falling when the clip begins? 2) Presently the snow only falls vertically. Is there any way to have it fall at an angle? Such as: you are inside a car that is travelling. The snow falling
-
Hi, I recently updated VideoPad and now I'm running into trouble as far as editing goes. Whenever I place video and audio into the software and piece together the video, when playing the preview/display, it lags after 2 seconds and then freezes entirely. The audio plays and it still continues, but the video portion just stops entirely and the pause button's response is SO slow too. I deleted a bunch of leftover media in the software, cleared the data cache, can have nothing running in the background and it still occurs everytime, it's so infuriating. Before this update, I would just lower t
-
"the recording will start once the program detects MIDI signal coming in". So does this mean that i can not "play along" to the other tracks i have recorded, Guitar, bass... with midi signal coming from my drums? I have completed the other tracks and i just want to play my drums into a track. My idea is that i do it with midi so i can edit after the fact. But i am having no luck in recording midi, hearing midi, much less editing midi. and now my project thinks i have recorded midi and will not let me go back to do a second take. totally lost and frustrated. PLEASE HELP!!!
-
Hello, I have started a new video project. I have recorded the videos on an iPhone 11, 4K at 30 frames per second. Video pad is struggling with these media files. They take a long time to load, any changes stalls the computer. They don't load & sometimes crashes. It shouldn't be anything that would stall the software, the video files are 873 MB QuickTime Movie (.MOV) & go for a max 5-6 mins time. I have to begin to use the iphone 11 4K on these video files so would really appreciate some help as it's urgent. I have uploaded the latest version, checked my free space on the com
-
So I was editing a video, was on the outro, over 5 hours worth of work. I get up to close my door, then i come back to my pc all screwed up, frozen. It's happened in the past, I have to unplug it because it's so frozen the power button doesn't work. It's happened befrore nothing new. I am unplugging it, then the realization hit. All the 5 hours of work, gone. I remember that VideoPad has an auto save feature, and am a little bet less freaked out. When I open VideoPad I'm asked if I wanna load from Auto Save, I do, and it fails to. https://cdn.discordapp.com/attachments/653822703853240350/70706
-
Hola, soy usuario con licencia del progrma Express Invoice. Mi consulta hace referencia a que no consigo averiguar si con el mismo programa se puede trabajar en ordenadores distintos y a la vez permanecer sincronizado . Por ejemplo, en cuanto en cualquiera de los ordenadores ingrese un cliente o factura nueva, dichos datos queden registrados y guardados, (imagino que alguna nube como Dropbox). Intenté sincronizar y darme de alta en Dropbox, pero no consigo nada de lo anteriormente expuesto. Un saludo, gracias.
-
Hello! I had received an installation code 2 years ago that I was successfully able to follow the steps with the code to get VideoPad fully functional on my computer. However, due to a recent reinstall, I need to reregister my software to get access and I'm having issues with it. I DID save the proper reinstall software as a backup so I know I have to correct version installed. However, apparently the code I saved in a word document was the "license serial number" that originally was used to get the key (it is 13 digit long code of only numbers) that when I tried to again "validate" at th
-
After starting up Voxal and then OBS it connects normally and it applies the changes that I want to my voice just fine, but within 5 minutes it randomly stops working and returns to my normal voice. I've turned it on and left it alone entirely some times and it would eventually stop even if no other interactions on my computer. I've turned it on and attempted recording and it always cuts out and returns to the normal voice in the middle. It doesn't seem that any outside applications are directly stopping Voxal from working as I've tried closing everything else and I still get the same issue.
-
Hello! I am having some trouble finding the option to adjust the framerate at which the software previews clips and sequences. I have used an older version of videopad in the past and the UI has obviously changed since then. Currently, the preview window is displaying clips at a framerate noticeably lower than 60FPS. While this no doubt improves the speed at which the software renders previews, I would prefer to have a more accurate representation of the final export while editing. Searching for existing solutions to my problem has only lead me to examples of how to adjust the f
