Search the Community
Showing results for tags 'Export'.
-
I have made 104 video files video in the videopad its about 3 hours long. The preview in videopad is playing properly but on exporting the video in any extension (.avi,.mp4) with 720p or 480p or as a portable video the video is not playing properly. The size of the exported file comes up to 8 gb. It takes atleast 12 hours to export. The exported video plays properly for about 30 mins and then its gets all shaky. The sound is perfect but just the video is all shaky. What am I doing wrong? I don’t get it. Previously I had made videopad videos of around 60 files of about 2 hours and th
-
When I export my video it is washed out (like it has a brightness filter on it). It is a cooking video. The walls are light gray and counter top is also light with a window in the back. You can't tell what's in the bowls because it's so bright ( again, only after exporting). It looks fine while editing.
-
Earlier today I exported a 15 minute video just fine and yesterday an hour long one but today I exported an hour and a half long vid and once it finishes processing threads it just doesnt move or make any progress. I left it for a few hours and nothing. Ive repaired, reinstalled, downloaded a new setup incase of updates or something, I opened up and tried to export a 1 min long vid and that didnt work so the length of the video isn't the problem. Help pls and thanks.
- 1 reply
-
- export fail
- export wont progress
-
(and 1 more)
Tagged with:
-
After I export the project, there is often pausing between the clips that wasn't there before. I'm not sure what the cause is. It doesn't make much sense. The pausing occurs right at the start of almost every clip.
-
Hello, I am new to VideoPad Professional. I record videos in 3840 x 1080 format so that I can record my screen and record from webcam. I am trying the following: Crop the video in half. So that I have two 1920 x 1080 videos Resize them as needed. And position them how I want. When I see my sequence in the preview, I can see everything as I want in the 1920 x 1080 ratio. But when I export the video it exports it in 3840 x 1080 format. Am I missing something? Is this even possible? Thank you in advance for any suggestions :).
- 14 replies
-
- crop/resize
- export
-
(and 1 more)
Tagged with:
-
Sometimes I would like to check how a part of a movie will turn out when exported. But it takes a lot of time to export the whole movie all the time. How does one select a second or two in the middle and just render them ? ( its to check the sync in detail with sound, and images and transitions ). It seems like a really great software, as most of it is very intuitive. Like it a lot.
-
Hi all, I'm looking into using MixPad as a replacement for MixMeister (MM) as they stopped developing or giving support since they have been a part of the Numark family. There is a large user base of fitness instructors worldwide which is using MixMeister (MM) to create beautiful playlists for fitness workouts. I've been using MM for 12 years now. I've been looking into MixPad last night. Looks very promising. I'll keep on testing. One thing I missed: - Is it possible to create a complete playlist or file which can be burned to a CD and be split into tracks or export as se
- 1 reply
-
- mixmeister
- export
-
(and 1 more)
Tagged with:
-
con la versione free (italiano) non riesco ad esportare video né sul pc né su YouTube: viene visualizzato l'errore "acquistare videopad ora per utilizzare questa funzionalità"... perciò la versione free non permette l'export?
-
Help!!!!!!!!!!! I was using video pad editor for about two weeks it was fine. I use it to edit videos for my youtube channel. Well for whatever reason after some windows updates installed it crashed few times. I added the update. By the way I have the paid version. Anyway I cannot use it right now. It keeps failing to export even to a file! It says it encountered an abnormal exception. It happens around the 28% mark that it fails. I don't know what to do! I ran a boot time check and apparently everything is ok. I doubt it's a malware issue. Could it be from the updates? And how would I know wh
-
I'm a new user of VideoPad and completed my first video. It's about 4 minutes long. Now, when I try to export it - I can't. No error message, but the export does not complete. I'm using Windows 10 and have plenty of horsepower. What can I do? This is not what I expected!! Thanks, RB
-
This is a huge problem. Whenever I export a video, it exports the full files that all of the clips in the sequence are from, rather than just the little bits I wanted (the actual clips, and their place in the sequence). The result is that I made a 3 minute long amv as a sequence, but it exports as 2 hours of footage because it's using the full files that all of the clips are from. I am very upset about this. I just wanted to make an amv! I have tried everything, PLEASE HELP if you can! Edit: I don't know much about what version I have, but I know that it's the free download (not a pro ver
-
Quel est le meilleur format pour exporter une video vers Instagram
-
Hi all, new user here. VideoPad Free 6.30 Windows 8.1 Managed to create a video using 3 clips and my own titles, software seems great but am confused on couple of points : (1) When I went to Export a pop-up directed me towards a paid version but I was able to dismiss it and continue regardless. So is this a trial version that has an expiry date or is it truly free for home use in perpetuity? If the latter, what features are restricted? (2) I exported in .wmv format and the resulting 3 minute video file is 26.2 MB but exactly the same video created by Windows Movie Maker
-
Hello, I am having a problem exporting the video. It tells me to download x264enc7 and when I change the settings aacenc3. I installed them both, ran them, tried to put them in Roaming/NCH/Components/<file name without .exe> nothing worked. It keeps on telling me the untold tale of "Failed: Unknown Error". This story was at first fascinating but as time goes those 3 words become more of a trouble than a mysterious fairy tale. I looked for the problem and found ALL the threads in NCH forums about this problem so please don't send me those threads, because those didn't help. I ha
-
Hi, I have been trying to export a 7 minute video with 2 songs via every file type there is and it keeps crashing or giving me the failed message halfway through. Files seem fine and cache was cleared. I've read all the threads and so far no luck. Would it be possible to upload my back up onto one drive and someone take a look? Running on Windows 7 32bit. Sorry but it's taken me quite some time to do this video and I like the software otherwise, it's currently the free version and I cannot try mpg format as that's only available in the purchased item.
-
I want to use some program, perhaps VideoPad, to time shift over-the-air TV programs. I haven't bought any full program yet because of slow processing speeds. Hauppauge TV outputs .ts and .mpg formats. Clipping the front and back commercials takes a minute but outputing/exporting one hour of TV takes upwards of 12 hours. Are there convert/export/video format options that could speed up the process. Seems like unpacking a .ts container, clipping the front and back, and repacking should take only a few minutes.
-
Repro: open any file in wavepad file / save as name.flac use default encoder settings now using "flac - Command-line FLAC encoder/decoder version 1.3.2" (reference version from xiph.org), run "flac.exe -t name.flac" I get: name.flac: ERROR, MD5 signature mismatch
-
I am currently creating a project consisting of a couple of videos, all in their own sequences with their effects and what not, compiled into a main sequence. Everything is working fine except for one video where the audio disapears after about half the video. Always in the exact same spot. The audio is working fine in the preview but not in export. Audio returns in the next clip after this one. The video is downloaded from YouTube in mp4 format. h264. Audio is AAC. The exact same thing happens if i only export that sequence.
-
With a licensed VideoPad, I've tried three times to export a 34-second video, and after an hour I click "Cancel" and try a lower resolution. First Try: HD 1080 Second Try: HD 720 Third Try: YouTube 480 This is with i7 3.6 GHz processor Dedicated 3GB graphics card 32GB RAM ...and minimal background proceses. This video has no audio track. Just one track with video and two with short captions. No heavy lifting. Each time, the progress gets to 99%, but never completes (within an hour). Any ideas?
-
Please help me !! I am exporting my 2min video. And no matter the resolution (already tried all). Videopad only exports the last 38sec. from the video. What should I do?
-
Hi all, I've tried to export a 30-minute video project in .wmv, .mov, and .mp4 files several times now. Sometimes the export "fails" with no further information, but when it's succeeded (exporting to .wmv and .mp4) it begins with about three minutes of video static. The audio is fine, but the images (the video is just still images with a single audio track) don't show up, just static. All the images used are the same size, same format, in the same folder. Any idea what's going on, or how to fix it? Any advice would be appreciated. edit: This is happening wi
-
Hi, my zoom effects are gone in the saved video file. I have applied a zoom video effect with many keyframes in it. The Sequence preview shows the video as intended. Exporting it as a video file, the effects don't show anymore. I'm using v4.11 on windows 8.1. Tried different file outputs (.avi etc), same problem. Can anyone help me?
-
I am trying to use the free, non-commercial version of VideoPad. In older versions I've had no problem exporting as avi. In version 6.00, I suddenly can't export anything. When I go to export any video, I get a window where the only options are to purchase VideoPad or enter a license code. You can see from this video that it says "(Unlicensed non-commercial home use)" on top so I believe this is the free version, and I'm not sure why this doesn't work.
-
I had a two minute long video of gameplay that I trimmed down to around 20 seconds. When I export it, the first 1.6 seconds are a still frame that I can't seem to get fixed, even when exporting with different settings. I am using Videopad 5.20. Can someone help out? Here is the link to the files: https://drive.google.com/file/d/15_E5Kpxmcx7weOsrhAxol8d629aGcqfv/view?usp=sharing
-
Hi, I've been having trouble with failed exports lately. I just bought a new PC: Dell Inspiron 15 7000, CPU Intel i7, 512GB SSD, 8 RAM, Nvidia graphics card. It's *way* better than my previous PC (Dell Vostro, non SSD, 4 RAM), and yet I am having trouble exporting vids. I tried reducing the video lengths, effects, transitions - but videopad seems inconsistent with which vids it will export and which it will fail to. Whereas last night I successfully exported a 27 min. long video , with 2 crossfade transitions, over 3 clips, as well as a 15 min. vid made up of about 20 clips and 9 tr