Jump to content

DannR

Members
  • Posts

    381
  • Joined

  • Last visited

Everything posted by DannR

  1. DannR

    Edit words

    The program doesn't have the option to edit the files directly, what you can do in this case is convert the file to a docx file and using MW, to edit this. then you can convert again the file to a PDF.
  2. Unfortunateñy there is no option from the program to modify the volume, what you can try to check is the device directly to your control panel and verify this. NCH Software formally takes suggestions or feedback about our products through the form at http://www.nch.com.au/suggestions/
  3. If the issue is with 2 specific files, in this case, would be better to check if the issue is not the file itself, You can send the files to the Technical Support here: https://www.nch.com.au/support/supportcontact.html?software=Scribe&support
  4. Does the issue appear after exporting the project? The reason is that sometimes the program would provide low quality on the preview, but after setting the exporting the result is full quality. You can also send some screenshots to the technical support here: https://www.nch.com.au/support/supportcontact.html?software=ExpressAnimate
  5. In this case, if you are creating a video with audio narrations, It would be better to use a Video Editor program Like VideoPad instead of PhotoStage. VideoPad would allow you to add multiple effects to thsi narration and set bookmarks that can help you to select the frame where you are going to apply the effect. You can get the program from here: https://www.nchsoftware.com/videopad/index.html
  6. -Try burning at lower speeds (Highly effective). -Try using different brands of quality blank media like Taiyo Yuden, or Sony. -Try upgrading your writer's firmware. In the meantime lets reinstall again the program and add again the files. You can reinstall the software from the next link: https://www.nch.com.au/components/burnsetup.exe
  7. What you can try to do is select File/ Option/ General Tab/ Uncheck the option Automatic Scan BPM. That should do it. Please try it again after that and see if that fixes the issue.
  8. Try to reinstall the program, remove it from your machine, after this, restart your computer, once that you have done that reinstall again from here: http://www.oldversiondownload.com/oldversions/photostage-8-50-2021-06-23.exe Then load the file, select Effects/Image Overlay, and load the image that you need.
  9. The issue is with all the Transitions, what you can try to do is replace these transitions, remove them and add them again, verify if after the export process you keep getting the same, also check what would be the format and the encoder that you are selecting. Check all this and try to export again.
  10. Are you using an external device, webcam, or screen recording, Make sure that if you are using an external device, this is running with the latest drivers, you can check that on your control panel. If you keep getting issues, send the information the to Technical Support: https://www.nch.com.au/support/supportcontact.html?software=Debut&support
  11. Try doing a clean install and delete all the cache of the program. Uninstall your software first, then go to the folder location below on your computer then delete the Classic FTP folder folders: C:\ProgramData\NCH Software C:\Users\(Your computer profile)\AppData\Roaming\NCH Software\Classic FTP If you can't find the AppData folder, set Windows to show hidden files and folders with the steps from this link: https://support.microsoft.com/en-us/help/14201/windows-show-hidden-files. After deleting the Classic FTP folder, restart your computer then install it again from the next link: http://www.oldversiondownload.com/oldversions/classicftp-4-00-2019-03-08.exe
  12. The Switch program would provide you the option for Audio Tags, this would display a window where you can enter manually the metadata of each audio file. In the end, you can convert the file, with the information and without changing the size.
  13. The road noise is only on the MP3 format, if you try to convert to another format do you get the same issue? Now for the Output format select MP3, then Select the MP3 Options.. then select the Volume Tab here do you apply any Amplify option? Check that you don't have any of this active, also try to convert also to another format, so you can check if the issue is direct with the format or there is a glitch.
  14. Try to open first the program and then select the Stream, in this case as you mentioned you can select Youtube, Twitch, stream Channels. Also try to set your sound card or "Stereo Mix" option as your Windows default recording device before trying again. Go to Control Panel > Sound > Recording menu > select your sound card or Stereo Mix and set as default. If these options are not listed, right-click on the blank area, select "Show disabled devices", look for the option, select, click "Set default", click OK. That should do it. Please try it again after that and see if that fixes the issue.
  15. En este caso el programa te permitira seleccionar el Balance General pero no tiene la opcion para modificar este, adicionanado mas columnas. NCH Software acepta formalmente sugerencias o comentarios sobre nuestros productos a través del formulario en http://www.nch.com.au/suggestions/
  16. On Debut, go to 'Options' then under the 'Audio' tab please check the box for 'Speakers' then click OK to save the changes. If that would not resolve the issue, then please set your sound card or "Stereo Mix" option as your Windows default recording device before trying again. Go to Control Panel > Sound > Recording menu > select your sound card or Stereo Mix and set as default. If these options are not listed, right-click on the blank area, select "Show disabled devices", look for the option, select, click "Set default", click OK. When ready, go to Debut options > Audio > checkmark Microphone and/or Speakers boxes and click OK to retest.
  17. Here you can check the supported formats of the program, MP3 is included: https://www.nchsoftware.com/slideshow/kb/566.html Now about the recording, if you are just loading the file the program should play this without problems, now if you are trying to record, the best option would be to change the program from WavePad, which is an audio recorder and editing software.
  18. DannR

    Genre (148)

    In this case the best would be to send some images and explain the situation to the technical support, you can get them here: https://www.nch.com.au/support/supportcontact.html?software=Stamp&support
  19. No, unfortunately, there is no option, even if you try to modify the ground with the levels, the Pool features would only allow you to change the depth and just would allow you to draw this a ground level. . NCH Software formally takes suggestions or feedback about our products through the form at http://www.nch.com.au/suggestions/
  20. DannR

    Kworld dvd 2 maker

    Debut program doesn't include drivers for another device, in this case, you need to do the search for the driver of your VHS device, and check that you are running the latest version, also check the Control Panel\Hardware and Sound\Devices and Printers select your device and set as default. If these options are not listed, right-click on the blank area, select "Show disabled devices", look for the option, select, click "Set default", click OK.
  21. DannR

    JRIDS

    There is no option from the program to create a report of BOM and get this print or even an option to print this out. The option that you have is to select the Report by category or location and print the items, the BOM would be on this items list. NCH Software formally takes suggestions or feedback about our products through the form at http://www.nch.com.au/suggestions/
  22. After adding the video files to your project, the program would try to fit the image to the size, even you can notice that some black bars are been added to some videos sides to fit them to your dimensions. In this case would be better to send the information to the Technical team, so they can help you with your project. You can contact them here: https://www.nch.com.au/support/supportcontact.html?software=PhotoStage&support
  23. DannR

    Stamp ID3 Tag Editor

    What is the setup that you are using, in this case, You cna try to reinstall, the issue is with all the artist? You can send the information request via here to the Technical Support: https://www.nch.com.au/support/supportcontact.html?software=Stamp&support
  24. When you're done with the recording or you load the file and you need to save it with those settings, select Save/ Save File As/ then Select the Mp3/ Select Save. After this, you would get the MP3 Encoder Window where you can set all those settings even with the preview option.
  25. Unfortunately, the program doesn't have the option for recording, what you can do is load the audio files with your information and manage this from the program, but no recording. NCH Software formally takes suggestions or feedback about our products through the form at http://www.nch.com.au/suggestions/
×
×
  • Create New...