Ronw7341
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Ronw7341
-
-
Borate and Nat, I appreciate your response. I've just chosen to change it to Black/White and for this project that's adequate. Thanks. Ron
-
Borate:
I'm not sure I've made myself clear as to the problem.
The video begins with a normal coloration.
Then suddenly there is about a two to three second dramatic increase in the saturation level of the color, then back to normal for several more seconds.
It happens often enough that I was hopeful that I wouldn't have to attempt to manually neutralize it, and I thought that using "Auto Levels" in the Blending & Color Correction area would perhaps equalize the high and low colors. (That doesn't change anything.)
This then would then allow me to choose to add or subtract color to the entire video and I'd be done.
Does this make the situation any clearer?
Thanks
Ron
-
I have a video which has MANY color highs and lows.
I've tried to have the system stabilize the video but to no appreciable avail.
It happens so frequently I don't want to have to try to isolate each instance and modify it by hand, I'm afraid it would make it no better or perhaps worse.
I've even contemplated changing it to Black/White if necessary but only as a last resort.
Any ideas would be greatly appreciated.
Thanks
Ron
-
Nat:
Exactly what I was looking for, as usual.
I couldn't ask for better help than you have been since I started. Thank you so much.
Ron
-0-0-
Borate:
Thank you so very much for your help. Exactly what I needed.
You have always been great help to me and I certainly appreciate it.
Thanks again.
Ron
-
Is it possible to reverse the order of a video in VideoPad?
-
Borate, you are the man! Again exactly what I needed. I think with your help I'm eventually going to get this thing figured out. I could not ask for more help than you have been. Thank you so much again. Ron😁
-
I'm new and your help has been a wonderful assist. I have a video timeline complete but near the middle is about a five second section that needs to have some saturation added to it. The rest of my timeline is perfect color wise. If I attempt to enhance the color my entire time line gets made too vibrant. How do I select that five second section and add saturation to that only. I've tried everything I can think of, read what I can find and still nothing. Would you please help me again? Thanks very much. Ron 🎞️
-
Borate, after consideration of what I now know, I think I'll just leave well enough alone and continue with the work-a-round. Maybe a future update will fix the problem. I appreciate your time. Thanks. Ron 😑
-
Borate, thanks for your response, but I'm confused as to what I am to do. I am a licensed user. Are you telling me to run the beta 7.25 and if so will that correct the problem or not? If there is a question about that, do you think I'd be better off just to keep what I have and use my work a round procedure. Thanks for your help and insight. Ron
-
After I make changes to a video, I go to Export, then to Video File, select the name of the file being edited, I then get an Export Queue dialog box, if I click to overwrite the existing file with the changes I've made, I get a red error message "Failed: File Not Writable. May be in use." Am I doing something wrong or is it possible to have the system overwrite the previous file? What I've done so far is rename the second copy adding an "A" to the end of the name so it becomes unique and the system creates another copy. I then delete first copy and rename second copy to the first copy name. It's just a work around I've found but there must be a better way. I hope you can help. Thanks. Ron 😡
-
I'm a new user of Video Pad 2018. Love the software so far. I know how to delete unwanted video, but CANNOT figure out how to cut out a section of the video and place it into another location on the timeline to make the story flow more clearly. I've used the two youtube videos below to try to help me, but I, nor any of my family members are able to make this work. What I want done seems fairly straight forward. I know we must be doing something wrong but cannot figure out what. Please don't just refer me back to the videos below, NCH technical support took me there and I still can't get it to work. Please help if you can with some step by step directions if possible. Thank you very much. Ron
How to Trim Videos: https://www.youtube.com/watch?v=npLB0leypn80
How to Split Video: https://www.youtube.com/watch?v=J0uQBZnUrsQ0
Video Pad ver. 8.91 Transitions DO NOT WORK
in VideoPad
Posted
I recently got Video Pad Ver 8.91. The transitions between clips work erratically at best and fail to work at all, at worst. I've reinstalled the S/W without any improvement. My prior S/W worked flawlessly in this regard. I wrote NCH but have not yet heard from them and I've got a deadline looming. Any help would be greatly appreciated. Thanks, Ron