Gekker

You should uninstall Voxal, restart the PC, reinstall Voxal, restart again to setup the audio drivers correctly, then connect your microphone, make sure Windows detects it correctly. Go to "Options > Preview Audio" and make sure the playback and recording devices are correctly selected, under "Preview Mode" select "Listen to the voice effect as you speak" and click "OK" Select a voice and click "Preview" you should be able to speak into the microphone and listen to your modified voice while you speak.

It is possible to set 2 Copper as clients of Inventoria as server, simply enter the same information on both Copper options. Instructions available at https://www.nchsoftware.com/inventory/kb/1289.html

Please report your issues through a support ticket at http://www.nch.com.au/support/index.html so the attention to the issue can be risen.

MP4 is definitely supported by Express Scribe as you can confirm at http://www.nch.com.au/scribe/kb/656.html Make sure the file plays fine with Windows Media Player to know the file is not corrupted. To load a file to Express Scribe use the "Load" button at the top or drag and drop the file into the middle white section of Express Scribe, where the files are listed when added correctly. if you keep having issues, report your issue at http://www.nch.com.au/support/index.html

Make sure you select "Audio CD" under the "Audio" tab. Make sure that the CD you're using is blank, try another blank CD and check if that works. If you're sure it keeps having an issue, take a screenshot of the message telling you there's no space and send a support ticket through http://www.nch.com.au/support/index.html

Hello, Crescendo is designed to set chords using only notes of the same duration NCH Software formally takes suggestions or feedback about their products through the form at http://www.nch.com.au/suggestions/

Make sure your DSS file is not in fact a DS2 file, as DS2 files are not supported by Express Scribe. Right click it and select "Properties" to check the "File Type" Also, DSS files are for the Pro version only, make sure your license is Professional and that is registered in the program at "File > Register Express Scribe..."

Try uninstalling Voxal, restart your computer, reinstall Voxal, register your license and restart the computer to set the audio drivers correctly.

In that case, gather some screenshots of the " “This file does not have the same version as this version of WavePad or it is corrupted." error message and anything worth noting and report it through a support ticket at http://www.nch.com.au/support/index.html so a bug report can be filled out.

Try deleting the cache folder named "WavePad" at C:\Users\<YourUserName>\AppData\Roaming\NCH Software\WavePad\ restart WavePad and open your project file. If you keep having issues, send screenshots of the pink/red editing window through a support ticket at http://www.nch.com.au/support/index.html

Make sure you're using high quality encoder settings by clicking the "Options" button next to the "Output Format" drop down menu. Under "Options (at the top) > Conversions" uncheck the "Normalize files when converting" box if it is checked and click OK Also try reinstalling, if you keep having issues contact support at http://www.nch.com.au/support/index.html

Para cambiar el tamaño de la imagen, use la herramienta a "Cambiar tamaño" bajo la pestaña "Inicio" En el manual de usuario puede ver la descripción de las opciones: http://help.nchsoftware.com/help/es/photopad/win/layer_resize.html

Try uninstalling, restarting the computer and reinstalling the software , probably some cache files are accumulated. If the issue persists enter a ticket at http://www.nch.com.au/support/index.html

Your license can only be registered in one computer at the time, otherwise it will be blocked. You also need to have installed a version of Switch released within 6 months from the time of purchase. Try entering your registration code at "File > Register Software" or request support at http://www.nch.com.au/support/index.html

It seems to be an issue where, despite disabling the AutoComplete on the program, after clicking the red close X button, the checkmark still appears on "AutoComplete" You should report this issue at http://www.nch.com.au/support/index.html

Hello, Express Accounts is designed to apply the discount on the invoices, not on a per customer basis. NCH Software formally takes suggestions or feedback about their products through the form at http://www.nch.com.au/suggestions/

It seem that IVR is designed to only generate G711U.

Try changing the output location, if that doesn't work, enter a support ticket at http://www.nch.com.au/support/index.html Include a screenshot of the error and your registration code.

Express Talk supports a maximum of 6 lines. You should try IVM, with a capacity of 64 phone lines: https://www.nch.com.au/ivm/index.html

If a reinstallation didn't work, enter a support ticket at http://www.nch.com.au/support/index.html Make sure to include your registration code so you can get the correct version for it.

You should confirm with your bank the requested account info, if it is correct, enter a support ticket at http://www.nch.com.au/support/index.html

Hello, You should send a support ticket through http://www.nch.com.au/support/index.html Make sure to include a screenshot of the error message and your registration code.

From the Web Access the new invoice and new quote number cannot be manually changed. It will use the next number available. You can only manually change the invoice number when creating the invoice from the program itself. From the program itself the quote number cannot be changed while creating it. You can see the next number to be used at "Options > Invoice/Quote" under "Numbering"

You can crop or resize already loaded images by using the "Crop" and "Resize" tools under the "Home" Tab. You can select the dimensions for a new "blank" image by going to "File > New"

Hello, the "Adding Windows and Doors" section of the user's manual can be found at http://help.nchsoftware.com/help/en/dreamplan/win/adding_windowsanddoors.html Basically, select a window and place it with left click, If you have issues with this, enter a detailed support ticket at http://www.nch.com.au/support/index.html