hernan
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by hernan
-
-
Hi Eduardo,
thanks for your help and excuse me for my bad English.
From the beginning, I setup the ports of the SPA3K in 5070 for FXS and
5060 for FXO.
About your previous suggestion "New Dial Plan", I have configured, in
Axon, a DP that indicates that all the number that begins with "9" it
eliminates the first digit and dials Out routing to an external line
connected to the SPA3k.The problem is that Axon have never recognized the
external line, therefore the DP does not work.
Configuration In Axon:
Tab External Line:
Line Name: SipuraSPA1
Server:
ID or User Name:500
Pass:
In Coming Call Ring On: 701
(701 is the incoming call group, in this group have defined my
extension).
I leave the field "Server" blank, but if I set it up with the IP of the
SPA3K, axon reports the following error:
Attempting to register sip:500@192.168.254.50
Register attempt for sip:500@192.168.254.50 failed
501 Not Implemented
Tab "Dialing Plans"
DP Name: SPA1
If numbers start with: 9
->Remove digits:1
->Prepend:
->Dial On Line: SipuraSPA1
All SIP extensions have configured in "Outbound Dialing Plan": SPA1
from internal phone I dial: 900541147904665, Axon reply:
Unable to find any extensions or groups with the name "900541147904665".
I think that the "Dialing Plan SPA1" should have removed the "9" and then
sent the number "00541147904665" to the external line "SipuraSPA1" and
SPA3K should to make the "Dialout" to the lagacy phone line, but Axon
does not apply the "Dial Plan" and thinks that I refer to an internal
line or group.
I think that the incoming calls from the FXO are working due to the "DP"
configured in the sipura, but Axon cannot dial out because doesn't apply
any "Dial Out DP" because it does not recognize to have any external
line.
I believe that it would be enough to create an external line to the IP of
the SPA3K and if in this way Axon managed to register in the SPA3K, then
everything should work OK, but I couldn't archieve to register Axon in
the SPA3K.
How did you managed to create the external line that registers in the
SPA3K?
Thank you for your patience and help.
Hernan
-
I have a SPA3000 [software Version: 2.0.13(GWg) Hardware Version: 2.0.1(1809)] connected to my Axon v1.06.
The FXS works OK.
The interface FXO, routing OK all incoming calls to the Axon (by means of a "Dial Plan" configured in the SPA3K [s0<:500@AxonIP:5060> "500" is a valid User-ID (without password) in Axon and 5060 is the default axon port]). But I can't make outbound calls from Axon to the real Phone Line.
Never I could that Axon saw the SPA3K as an external line and therefore the "Dialing Plans" of Axon never works.
I have tried many configurations and no has worked.
Please, what I must make to solve this problem?
THS. Hernan Sanchez - hshome@ita.com.ar
External Line to SPA3000 DONT WORK
in Axon
Posted
Thanks Phill & Eduardo.
Finally Axon is working OK and "dialOut" by SPA3000 is OK.
Solution:
1) I renamed the names of the Dial plan and the external line to "default", but don't work.
At this point, the "DP" worked, but when Axon make a "DialOut", it reply
with busy tone. and In the Axon console i see inmediately call is
disconnected.
2) Finally, in the external line definition, I set the server with de IP
of the Sipura SPA3000. and all work OK.
Time to time, in the console of the Axon i see: register attemp for
sip:500@192.168.254.50 failed (501 not implemented), but all work OK.
(192.168.254.50 is the IP assigned to Sipura SPA3K, and 500 is the User
Name defined in suscriber information in the tab PSTN Line (FXO) in the
Sipura SPA3000)
My next test will be to add to AXON one second line, with another FXO.
He is annoying that obligatorily the firs line and DP must be called
"default". But if this a bug it could cause that the second line does not
work.
i report my test to you in the next week.
Thank you very much - Hernan