hernan Posted May 30, 2006 Share Posted May 30, 2006 I have a SPA3000 [software Version: 2.0.13(GWg) Hardware Version: 2.0.1(1809)] connected to my Axon v1.06. The FXS works OK. The interface FXO, routing OK all incoming calls to the Axon (by means of a "Dial Plan" configured in the SPA3K [s0<:500@AxonIP:5060> "500" is a valid User-ID (without password) in Axon and 5060 is the default axon port]). But I can't make outbound calls from Axon to the real Phone Line. Never I could that Axon saw the SPA3K as an external line and therefore the "Dialing Plans" of Axon never works. I have tried many configurations and no has worked. Please, what I must make to solve this problem? THS. Hernan Sanchez - hshome@ita.com.ar Link to comment Share on other sites More sharing options...
romeroe2 Posted May 31, 2006 Share Posted May 31, 2006 Hello Hernan, what you shall do is it to create a new dialing plan different than default, follow the same procedure as you did and you are done. I had the same problem and now it is up and running. Kind Regards Eduardo I have a SPA3000 [software Version: 2.0.13(GWg) Hardware Version: 2.0.1(1809)] connected to my Axon v1.06. The FXS works OK. The interface FXO, routing OK all incoming calls to the Axon (by means of a "Dial Plan" configured in the SPA3K [s0<:500@AxonIP:5060> "500" is a valid User-ID (without password) in Axon and 5060 is the default axon port]). But I can't make outbound calls from Axon to the real Phone Line. Never I could that Axon saw the SPA3K as an external line and therefore the "Dialing Plans" of Axon never works. I have tried many configurations and no has worked. Please, what I must make to solve this problem? THS. Hernan Sanchez - hshome@ita.com.ar <{POST_SNAPBACK}> Link to comment Share on other sites More sharing options...
romeroe2 Posted May 31, 2006 Share Posted May 31, 2006 Hernan I forgot to indicate that SPA3000 has a default assignent of SIP ports 5060 for FXS 5061 for FXO and AXON by default tries to place the outband calls in the port 5060 so another modificaction i made was to set the FXS SIP port to 5070 in the SPA3000 and the FXO SIP port to 5060. and that was all. and after that i was able to place outband calls. Kind Regards Eduardo Link to comment Share on other sites More sharing options...
hernan Posted June 1, 2006 Author Share Posted June 1, 2006 Hi Eduardo, thanks for your help and excuse me for my bad English. From the beginning, I setup the ports of the SPA3K in 5070 for FXS and 5060 for FXO. About your previous suggestion "New Dial Plan", I have configured, in Axon, a DP that indicates that all the number that begins with "9" it eliminates the first digit and dials Out routing to an external line connected to the SPA3k.The problem is that Axon have never recognized the external line, therefore the DP does not work. Configuration In Axon: Tab External Line: Line Name: SipuraSPA1 Server: ID or User Name:500 Pass: In Coming Call Ring On: 701 (701 is the incoming call group, in this group have defined my extension). I leave the field "Server" blank, but if I set it up with the IP of the SPA3K, axon reports the following error: Attempting to register sip:500@192.168.254.50 Register attempt for sip:500@192.168.254.50 failed 501 Not Implemented Tab "Dialing Plans" DP Name: SPA1 If numbers start with: 9 ->Remove digits:1 ->Prepend: ->Dial On Line: SipuraSPA1 All SIP extensions have configured in "Outbound Dialing Plan": SPA1 from internal phone I dial: 900541147904665, Axon reply: Unable to find any extensions or groups with the name "900541147904665". I think that the "Dialing Plan SPA1" should have removed the "9" and then sent the number "00541147904665" to the external line "SipuraSPA1" and SPA3K should to make the "Dialout" to the lagacy phone line, but Axon does not apply the "Dial Plan" and thinks that I refer to an internal line or group. I think that the incoming calls from the FXO are working due to the "DP" configured in the sipura, but Axon cannot dial out because doesn't apply any "Dial Out DP" because it does not recognize to have any external line. I believe that it would be enough to create an external line to the IP of the SPA3K and if in this way Axon managed to register in the SPA3K, then everything should work OK, but I couldn't archieve to register Axon in the SPA3K. How did you managed to create the external line that registers in the SPA3K? Thank you for your patience and help. Hernan Link to comment Share on other sites More sharing options...
phill Posted June 2, 2006 Share Posted June 2, 2006 Hey Hernan! I had the same problem too, the way I solve this is by renaming the Outbound Dialing Plan to default. If I use some other name like Vonage, Spa or what ever name, Axon does not dial out. Try to rename your DP Name: SPA1 to default Please reply if that works, so that we can report it as a bug. Cheers Phill Link to comment Share on other sites More sharing options...
hernan Posted June 2, 2006 Author Share Posted June 2, 2006 Thanks Phill & Eduardo. Finally Axon is working OK and "dialOut" by SPA3000 is OK. Solution: 1) I renamed the names of the Dial plan and the external line to "default", but don't work. At this point, the "DP" worked, but when Axon make a "DialOut", it reply with busy tone. and In the Axon console i see inmediately call is disconnected. 2) Finally, in the external line definition, I set the server with de IP of the Sipura SPA3000. and all work OK. Time to time, in the console of the Axon i see: register attemp for sip:500@192.168.254.50 failed (501 not implemented), but all work OK. (192.168.254.50 is the IP assigned to Sipura SPA3K, and 500 is the User Name defined in suscriber information in the tab PSTN Line (FXO) in the Sipura SPA3000) My next test will be to add to AXON one second line, with another FXO. He is annoying that obligatorily the firs line and DP must be called "default". But if this a bug it could cause that the second line does not work. i report my test to you in the next week. Thank you very much - Hernan Link to comment Share on other sites More sharing options...
rai Posted July 12, 2006 Share Posted July 12, 2006 Somehow I got it now working. Can make calls from the handset connected to the SPA-3102 (should be identical als the SPA-3000) and even from my softphone on the PC. Also get in call's from the outside world en every handset is ringing. So far so good, but if someone is now calling me I get an caller-id on the handset not the number of the one that is calling me, but the info from what has been filled in by "PSTN Line" from the section "Subscriber Information". It is showing on the handset" "SipuraFXO (that's how I called the SPA) and as telephonnumber it's showing 111 (that's the user-id). My guess is that in the "PSTN-To-VoIP Gateway Setup" part (were I have set "no" to "PSTN Ring Thru Line 1") you have to fill in something in the "PSTN Caller ID Pattern" field. Is this realy the solution, is someone having htis same problem and how to fix it? Link to comment Share on other sites More sharing options...
fredtheman Posted July 14, 2006 Share Posted July 14, 2006 So far so good, but if someone is now calling me I get an caller-id on the handset not the number of the one that is calling me, but the info from what has been filled in by "PSTN Line" from the section "Subscriber Information". It is showing on the handset" "SipuraFXO (that's how I called the SPA) and as telephonnumber it's showing 111 (that's the user-id). There seems to be a lot of information on how to get the Sipura to pass on CID information unchanged to handsets/softphones: http://www.google.com/search?q=PSTN+Caller+ID+Pattern Please report back, as I'm about to order a Sipura 3xxx :-) Link to comment Share on other sites More sharing options...
rai Posted July 15, 2006 Share Posted July 15, 2006 Well the magic one is the "PSTN CID For VoIP CID". THis has to be set to YES. Int eh SPA 3102 it's set to NO be default. Link to comment Share on other sites More sharing options...
Zerocool Posted July 25, 2006 Share Posted July 25, 2006 Hello Rai, Greetings. Could you please send me the settings that you changed in the SPA-3102 to get it to work. I bought one and still cannot get it to work. I can get incoming voip calls. but cannot make PSTN calls. Thanks, Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now