dsh979 Posted August 21, 2009 Share Posted August 21, 2009 RE: TELEPHONY DEVICE CONTROL (START/STOP CONTROL) The reason VRS is not working with our Way2Call Modem is because VRS does not set the Way2Call Modem to"Active" when the Way2Call Modem is selected as the telephony device. VRS should set the following TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device. We have test other telephone recoding software (apart from VRS) and this other software works correctly because it sets the following TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device. It has taken many hours and many many emails to technicians in other companies to determine this. It is dissapointing that NCH does not seem to know about this. Does anyone know of a fix or hack that can be used to get VRS to do this correctly (ie. to set the TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device for start/stop control in VRS). Any ideas would be greatly appreciated. Regards Link to comment Share on other sites More sharing options...
Guest N.C.H a.n Posted September 4, 2009 Share Posted September 4, 2009 RE: TELEPHONY DEVICE CONTROL (START/STOP CONTROL) The reason VRS is not working with our Way2Call Modem is because VRS does not set the Way2Call Modem to"Active" when the Way2Call Modem is selected as the telephony device. VRS should set the following TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device. We have test other telephone recoding software (apart from VRS) and this other software works correctly because it sets the following TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device. It has taken many hours and many many emails to technicians in other companies to determine this. It is dissapointing that NCH does not seem to know about this. Does anyone know of a fix or hack that can be used to get VRS to do this correctly (ie. to set the TAPI control for the Way2Call Modem "device.active=true" when the Way2Call Modem is selected as the telephony device for start/stop control in VRS). Any ideas would be greatly appreciated. Regards Hi, Could you manually set it to active and then set VRS to voice activated recording for the starting and stopping? Link to comment Share on other sites More sharing options...
snapline Posted January 12, 2010 Share Posted January 12, 2010 Hi, Could you manually set it to active and then set VRS to voice activated recording for the starting and stopping? I am having the EXACT same problem with the software and VRS. Has a fix been found to this issue PLEASE! Software is wonderful but for this problem Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now