bbob

New axon 1.07 solved above problem :-)

I have an AVM Fritzbox phone that is connected to an internal axon number. Everything works fine but there is 1 big problem 00:12:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 00:12:23 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 00:39:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 00:39:23 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 01:06:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 01:06:23 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 01:33:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 01:33:24 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:00:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:00:24 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:27:23 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:27:24 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:54:24 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 02:54:24 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 03:21:24 Extension 102 is at: sip:102@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 03:21:24 Extension 101 is at: sip:101@10.0.0.130;uniq=9FFC16C67F14C1A185B1719960349 is take from the log file. After 25 minutes the fritzbox reconnects to the axon server. When placing a phonecall it will be cut off. All other device like software phone don't have this problem. I have sent a report to avm support but the say the problem is in axon which should be true as I only have problems with the fritzbox when connected to axon. Axon support does not answer to my mails.

Below is some info on how uplink (sip > skype) can work together with axon using the uplink "use the dialed number" option First thing to do is go to axon web interface > extensions add an extension extension id: skype (when using another name please use this name below in the uplink sip account numer box and also in the external line user id below) display name: skype password: (typ your password here) 1234 in this example outbound dialing plan: default In uplink under sip you can add the above settings display name: skype sip account number: skype (or other name you supplied under add an extension) server: (the ip address of your axon server) password (the password you supplied during axon add extension) 1234 in this example Also you have to use the dialed number option. Restart uplink. Uplink will now login to the skype account (on your axon server). Read the SIP PRIVATE IP Go back to the axon webinterface. Add an external line Line name: Skype Server: (type the SIP PRIVATE IP supplied by uplink here) User ID: Skype (the user id should be the same as the user id that you use for uplink to login to axon) Password (the password should be the same as the one you used for the uplink extension in axon) 1234 in this example In the axon webinterface now go to dialing plans go to default add dial rule. if the number starts with: 8 (can be a different number but preferably not 1 as these are normally internal axon extensions) remove digits: 1 dial on line: (select your skype line here) Above dialplan is for people using regular touchtochtone phones without display. Whenever you dial 8 and after that the skype speed dial number you will be connected. You can also add the following option: add dial rule. if the number starts with: skype_ remove digits: 6 dial on line: (select your skype line here) this means whenever you type skype_ and after that the skype user name or skype speed dial number you will be connected. It took a few hours to figure this out but it works now. Any comments please post them.

Update it works: First thing to do is go to axon web interface > extensions add an extension extension id: skype display name: skype password: (typ your password here) 1234 in this example outbound dialing plan: default (at the end you can change this into another dialing plan) In uplink under sip you can add the above settings display name: skype sip account number: skype server: (the ip address of your axon server) password (the password you supplied during axon add extension) Also you have to use the dialed number option. Restart uplink. Uplink will now login to the skype account. Read the SIP PRIVATE IP Go back to the axon webinterface. Add an external line Line name: Skype Server: (type the SIP PRIVATE IP supplied by uplink here) User ID: Skype (the user id should be the same as the user id that you use for uplink to login to axon) Password (the password should be the same as the one you used for the uplink extension in axon) 1234 in this example In the axon webinterface now go to dialing plans go to default or create a new dialing plan. When creating a new dialing plan don't forget to go back to the skype extension and change the dialing plant into the one you now created. either way dafault of new dialing plan. add dial rule. if the number starts with: 8 remove digits: 1 dial on line: (select your skype line here) Above dailplant is for people using regular touchtochtone phones without display. Whenever you dial 8 and after that the skype speed dial number you will be connected. You can also add the following option: add dial rule. if the number starts with: skype_ remove digits: 6 dial on line: (select your skype line here) this means whenever you type skype_ and after that the skype name or skype speed dial number you will be connected.

Have tried to do what you did. In Axon I added an external line called skype. I have to supply a server ip, uplink showed my 10.0.0.200:5071 as sip private ip so I used this. Axon requires to supply username and password. I used uplink in both cases but have tried skype and other names. Using dialing plans i for example used 88 using remove 2 digits and than dial out using skype. When I dial 88 uplink shows an incoming sip call. When I dial 88echo123 (test service) Axon shows me an error message 19:46:16 Call 124 -> sip:88echo123@10.0.0.200 19:46:16 Authorization failed for server 19:46:16 Error message was: Proxy Authentication Required 19:46:16 Check username or password for the proxy server. 19:46:16 Perhaps calls to this number are not allowed by this server. 19:46:16 Call 124 -> sip:88echo123@10.0.0.200 disconnected For test call I am using express talk

Sounds great, but how can you do this in axon ?

Within skype I can set a speed dial numer for people in my contact list. Uplink works well but you have to change it whom to call to inside the software every time. Would it not be easier if calling from sip to skype you just get the skype dialtone and them you can press a speeddial numer from your list. Could this be changed in the next software relaease.