Jump to content

Advanced cropping in home version?


Macek.Tomas7

Recommended Posts

In the video, Connor used a rotated blank clip as a mask and apply "Green Screen" effect to make the marked area transparent. You can actually trim the picture on picture with arbitrary boarder shape by using the same method:

 

1.Use any drawing tool (e.g. windows paint) make a mask image. Use two colors to mark the content and border area.

 

o2w99bopzd.jpg

 

 

2. Apply "Green Screen" to make the content area transparent. This is our Sequence1.

 

qnzqga3puk.jpg

 

 

3. Add a new sequence(Sequence2) and use Sequence1 as an overlaying clip.

 

08gr8a9cm5.jpg

 

 

4. Apply "Green Screen" to the overlaying clip and make the border transparent.

 

z0tvcpp9t1.jpg

 

 

5. Now you can use Motion effect to place the overlaying clip whichever way you like.

 

qwova45vq8.jpg

 

 

This is just a temporary solution before we get the masking feature done. You can't soften the border by this way. It would work if you don't need soften border and you can find a color as color key.

 

Best regards.

Link to comment
Share on other sites

Essentially what Sam and Connor suggest, approached slightly differently. Sam's method is likely cleaner. The linked video is just a rough demo...

 

Grab a shape from images on the Net or create your own with graphics tool and fill it with a color that does not appear in your video.

 

Place your video on track one and the image you created on track 2 (above track one).

 

Click the yellow star at the bottom-left of the track one image and use the SCALE and POSITION to place it where you want over the background.

Move the scrubber (the red line) if necessary, to see the desired portion of the background. APPLY. That becomes SEQUENCE ONE.

 

Click the + just above the time line and to the right of "sequence one." That will clear the time line and you will be creating sequence two.

 

Place your background video on track one. Then click the SEQUENCE tab (top-left) and place SEQUENCE ONE on track two (above track one)

 

Click the yellow star in track two, ADD EFFECT, click on the GREEN SCREEN choice, click on CONFIGURE EFFECT and, lastly, click on the effect you created.

It then should be filled with a white/black checkerboard indicating where the background scene will be shown.

 

On the time line, click the yellow star on track one, and use SCALE, POSITION, CROP, etc. effects to fit the desired portion of the background into the "hole" you created in the last step. APPLY.

 

http://hevanet.com/hb/heart.wmv

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...