Delta

I wasn't originally writing a "how to" in this thread, but in case anyone is looking for a step by step, here it is: 1. Run the installer for Wavepad 3.05 (or any version 3.x) 2. If the MS compatibility wizard comes up, let it do its thing, just proceed to install the program regardless of any messages. 3. Now right click on the Wavepad desktop icon (or the Wavepad program item in the Windows Start Menu) and select "Properties" 4. When the Properties dialog comes up, select the "Compatiblity Tab" 5. Check the box that says, "Run this program in compatibility mode for:" 6. Select a mode from the dropdown box that works best for you. You may have to experiement a bit, but I found that Vista, service pack 2 works best for me. 7. Click "Apply" and "OK" and all that and you're all done and good to run. Note: You don't need XP Mode to do the above.

No problem. You don't need XP mode. I explained how I installed 3.05 on my Windows 7 system in the following thread, which I updated yesterday: http://nch.invisionzone.com/index.php?showtopic=14242 Please read the seventh post from that thread, in particular, which I just added to summarize the steps for anyone who is in a similar situation. Also note that when I mentioned XP or Vista COMPATIBILITY mode (as opposed to "XP Mode"), I meant the compatibility mode that you can select on the Compatibility Tab of the "Properties" dialog, which you get when you right click either the Wavepad desktop icon or the Wavepad program item in the Windows Start menu. And, of course, first you have to check the checkbox where it says: "Run this program in compatibility mode for" -- And then you can select the mode from the dropdown that works best for you. (You can use this method for any old program you have. It works for some programs; it doesn't work for others, and for those, you need the real XP mode.) Originally, I selected XP, but after I experimented a bit I upgraded myself (so to speak) to Vista service pack 2, and now Wavepad 3.05 works better for me than it ever did even on my original XP notebook. Try it for yourself, and let us know how it works out. Regards.

@wavepad fan, You might want to take a look at the following post: http://nch.invisionzone.com/index.php?showtopic=14242 Regards

Well I got the "classic colors" that I requested back in this post: http://nch.invisionzone.com/index.php?showtopic=10597 but I seem to be pretty much a lone voice on the scrolling issue - re: http://nch.invisionzone.com/index.php?showtopic=14280 I can't work around that issue because it makes me physically sick (no joke). However, I'm happy to report the good news is that I've been using Wavepad 3.05 under Windows 7 since back in April 2010. The only thing I've changed since I wrote my post above is that now I'm running it under Vista compatibility, service pack 2. It runs just as good as it did on my original Windows XP laptop, only now it runs faster. If they fix the scrolling issue then I can upgrade since I think Wavepad is otherwise the best. Regards

Here is the link to the components: http://www.nch.com.au/components/ Regards

I’m presently still using WavePad version 3.x. So this is to answer a question that should behoove the NCH bean counters to ask: “Why don’t you upgrade to the new version of WavePad?” Answer : The way the screen scrolls like a merry-go-round gives me a migraine that lasts for days. There are many possible solutions. The simplest solution, since they already have the code for it, would be for the WavePad developers to include a “classic screen scroll” option that would work like WavePad 3.x and prior versions. The old code was at least tolerable because you could click the zoom-in then zoom-out buttons to center the screen and get rid of the merry-go-round effect. While not optimal, I’ve nevertheless quietly used this method for years without complaining about the cludginess of it. But in the present 4.x version, this is no longer a workable solution. If the WavePad developers want to improve over both the classic screen scroll and the current merry-go-round nightmare scroll, then I think the best method would be to borrow the metaphor of scrolling a document a page at a time. When you page scroll a document, the screen page smoothly scrolls a whole page at a time. So, in WavePad, when the cursor reaches the end of the screen, WavePad should smoothly scroll forward an entire screen (or page, as it were), and the cursor should then be at the beginning of the new screen page. The Masters version could also include the option to assign keys, such as the page-up and page-down keys, to manually scroll through an audio file a page at a time (at least when the file is paused/stopped). It would also be nice to be able to assign key combinations (such as the control + page-up and the control + page-down keys) to manually scroll forward and backward a half-screen page at a time. I recognize that there will probably be some who actually like the way that version 4.x presently scrolls, so my suggestion is to offer the different scrolling methods as an option that can be selected in the Masters edition, just as the color scheme can now be selected. Speaking directly to the NCH bean counters for a moment, I’d like to suggest that these personalization options are, in my opinion, what makes the WavePad Masters edition worth paying for to those of us for whom the basic version is otherwise all that is really needed. The Ford Model T concept of one size and color fits all only worked for Ford so long as it was the only game in town. But WavePad is not the only game in town. So it’s worth repeating: Personalization is worth paying for. I’d be interested in hearing opinions, and hopefully some support from the other one or two WavePad forum users out there, for NCH to offer an alternative scrolling method of some sort to the current merry-go-round scroll. NCH is not likely to invest in any changes unless there is a show of hands, so if you don't like the merry-go-round scroll, or if you would like to see some other scrolling options, please say so.

Ok, now I’m partially able to answer my own question, as I’ve recently acquired a new system with Windows 7. This is only a partial answer because I really only use the basic editing features. Drum roll, please … and the (partial) answer is … Yes! It works! When trying to install it, it complained about not being designed for any version after Vista, but then it allowed me to install it with the compatibility wizard. It created a shortcut on my desktop, which I right-clicked, clicked the compatibility tab, and then selected XP service pack 3. The compatibility mode that I settled on was XP service pack 3 because that’s the last operating system that I happily ran it under. Now you might reasonably ask me why I don’t just upgrade to the new version of WavePad, and the answer is I would except for one very critical design flaw. But that’s the subject for another post: WavePad Screen Scrolling – An Ocular Migraine.

Does Wavepad version 3.05 (or 3.x) work on Windows 7 ? Has anyone tried it? Also, it occurred to me that if Wavepad 3.05 doesn't work under the "Windows home premium" version, then it may work under the "Windows professional" version using "XP mode." So, the question is whether anyone has tried either method, and if so, can you shed some light? Thanks.

> " What's been added with the new versions? " artsmith222, You might want to take a look at this link for a (complete?) list of changes over time (scroll down the page). http://www.nch.com.au/wavepad/versions.html Hope it helps.

I just tried the new 4.01 version on my notebook computer and have the following issue with the new colors used in the editing area: The new colors don’t provide enough contrast for editing purposes. It gives the appearance of driving through heavy fog on a very smoggy day. It’s a depressing color combination, and it makes editing difficult due to the lack of contrast. Also, when an area is selected, the lighter blue on blue doesn’t provide enough contrast for editing. (Note: These colors are fine for Menu items and other Windows controls, where the user just needs to click something, but not for performing detailed editing where you really have to see what your doing.) But black works well as a background for a brighter waveform of a different color, as you had before. In short, the original colors that you had before, green on black, were just perfect. If you don’t want to bring back the original colors, then how about allowing the user to configure the colors? Or, if that’s too much to ask for, then how about at least having a “classic colors” option that gives the user the choice of keeping the very satisfactory original color scheme? Apart from this issue, WavePad’s other new features look great. I do hope you will fix the color scheme, or at least offer some color configuration options. Thanks.

Nice workaround, given that WavePad is unfortunately flustered by cover art.

It would be nice if there were software to split channels and automatically save them to different files. If anyone finds that software, let us all know. In the meantime, here’s one way of doing it for multi-channels, using MPC and WavePad: If you don’t have MPC (Media Player Classic 6.4.9), then you can download it at: http://www.download.com/Media-Player-Class...tml?tag=tab_pub Install it with no fear. It’s a free, open source media player primarily for video playback. Once you have MPC installed, it’s quite simple: 1. Fire up MPC and go to “Audio Switcher” under “Internal Filters” in the Options window. You’ll find it from the menu bar by clicking: View > Options > (+) Internal Filters > Audio Switcher You’ll see all the options you need, and then some, to configure your channels. 2. In the grid, select just the one channel that you’re interested in by checking it in the appropriate row and column and unchecking the others. (Remember to click Apply and OK to save these settings.) 3. Now play the file through MPC and record it through WavePad (using your internal sound card). Repeat from step #1 for each channel of interest. Could NCH rig up an Audio Switcher type of function in WavePad? Just something to think about …

Musikone - I happened to see the following post, which I think is related your question: http://nch.invisionzone.com/index.php?show...&hl=upgrade And also the following FAQ: http://www.nch.com.au/wavepad/faq.html " Q. Can I upgrade from a previous version? What is the upgrade policy? All minor upgrades and bug fixes and some major upgrades are available free. Simply install the new file over the old file. If we introduce major new features or change the registration system, we may require users to purchase an upgrade. We guarantee free upgrades for 3 months from date of purchase. If in doubt, backup your old version and just try the new version. For upgrades, please use www.nch.com.au/upgrade to view discounted upgrade pricing. You will need to have your previous registration ID and Key to purchase an upgrade key." So if you backup your software and still have your key code, then there should be no danger in attempting an upgrade to any future version. You can always reinstall your original version, if necessary. I hope this is helpful. ps - I think the help that you've been providing to others is great! Regards, Delta

Raven, That’s an interesting question to me, as I find myself using WavePad as a player for my Mandarin language learning files. That’s because I tend to tweak them each time I listen to them and because it’s so easy to set a loop or to jump around in the file. WavePad is a fabulous editor that can also convert, record, rip, and yes, play. On the other hand, WavePad isn’t intended to be a player, and it doesn’t have all the features that a player has, such as an equalizer to name one of many. Also, it takes much longer to load a file completely to memory for editing than to just playback. In short, it has a different purpose, for which it has a different design. However, that doesn’t mean you can’t use it as you wish. For speech files, you don’t need an equalizer, etc., but for music, you might want it. And perhaps WavePad will someday be morphed into a full-fledged WavePlayer. Cheers!

You may need the MP3 codec. If so, then you can download it here ... http://www.nch.com.au/components/mp3el.exe